Rain test chamber, IP68 testing equipment 【 Yuexin Production 】 Factory price IPX8

NegotiableUpdate on 03/22

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

IPX8 Pressure Immersion Testing Machine Product Introduction IPX8 Pressure Immersion Testing Machine is suitable for testing the IPX8 waterproof rating of products. The outer wall of the tank is wrapped with insulation cotton to prevent rapid heat loss and avoid burns to operators. The equipment is equipped with a heating tube that can heat the internal water temperature to 80 ℃

Product Details

IPX8Pressure immersion testing machine

lProduct Introduction

IPX8 pressure immersion testing machineSuitable for product developmentThe IPX8provide againstWater level test，The outer wall of the tank is wrapped with insulation cotton to prevent rapid heat loss and avoid burns to operators. The equipment is equipped with heating insidePipe,The internal water temperature can be heated to 80 ℃.

lProduct images

lapplications

Outdoor lighting fixturesHousehold appliances, automotive partsAnd other electronic and electrical products.

lExecution standards

Compliant with IEC60529:1989+A1:1999+A2：2013《Degrees of protection provided by enclosures(IP Code)》、GB4208-2017The requirements of clause 14.2.8 of the "Degree of Protection Provided by Enclosures (IP Code)" and clause 9.2.9 of GB7000.1 "Luminaires Part: General Requirements and Tests".

lEquipment parameters

Technical Parameter	structureparameter
	Equipment external dimensions	Approximately 71 in length0 * Width 530 * High840mm
	Equipment internal dimensions	make an appointmentDiameter 300 * Height 300mm
	Tank wall thickness	6mm
	Tank material	stainless steel
	flange thickness	30mm
	Flange Material	stainless steel
	Equipment weight	About 100KG
	functionparameter
	Heating temperature	80℃
	Pressure control method	Automatic adjustment
	Pressure error value	±0.002 Mpa
	Pressure sensor display accuracy	0.001Mpa
	Test water depth range	0—50 meters
	Pressure adjustment range	0—0.5Mpa
	Exhaust pressure of safety valve	0.55Mpa
	limiting pressure	0.6Mpa
	Test time setting range	0-999 min
	Protector	Pressure safety valve protection, leakage switch protection
	Air intake adjustment method	Manually adjust the pressure regulating valve
	Electrical parameters

lProduct Details

lProduct characteristics

1Suitable for IPX of products8Waterproof level test.

2Tank bodyuse304 stainless steel materialWhole sub arc welding forming，Good pressure resistance；The exterior is made of stainless steel plates bent and welded into a square structure, which is clean and easy to clean as a whole.

3The outer wall of the tank is wrapped with insulation cotton to prevent rapid heat loss and avoid burns to operators.

4Independent chassis:Made of stainless steel material welded into shape,Wall mounted installation structure, easy to operate.

5、Silicon rubber sealing ring，Good elasticity，Not easily damaged.

6The tank cover above the equipment is fixed with 12 hexagon socket screws (with an auxiliary wrench provided).

7、The equipment is equipped with a safety valve,Automatically release pressure after exceeding the rated pressureTo prevent improper operation by operators and setting the pressure too high.

8、The electronic control components are importedBrand (such as:LSPanasonic, OmronEtc.)；pneumatic componentsuseTaiwan original Yadevisitor，Ensure the stability and service life of the equipment.

9、The testing time can be setFor: 0-999 minutes, when the testing time is reached, the pressure supply can be automatically stopped and the air inside the tank can be automatically discharged. The testing personnel can open the tank cover and take out the test sample.

10、Pressure display:Imported“Panasonic”brand-Pressure sensor，Automatically control the test pressure inside the tank and control accuracy：±0.002Mpa，sensor Displayaccuracy：0.001Mpa。

11The device is equipped with heating tubes inside,Can heat the internal water temperature to 80 ℃There is a heating switch on the chassis, and the temperature is displayed through the temperature control meter on the chassis with an accuracy of 1 ℃.

12Built in horizontal sample placement plate (made of 304 # stainless steel material), convenient for users to access and place.

13、deviceThe base is equipped with 4 movable brake wheels for easy movementAnd fixed.