Remote Jet Air Conditioning Unit - Jet Air Conditioning Unit

NegotiableUpdate on 10/14

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Remote Jet Air Conditioning Unit - Jet Air Conditioning Unit Remote Jet Unit Remote Jet Unit Features: 1. The spherical air outlet unit adopts a superior jet performance spherical nozzle as the air supply outlet, which can achieve long-distance air supply without air ducts

Product Details

Remote Jet Air Conditioning Unit - Jet Air Conditioning Unit

Remote jet unit
Characteristics of remote jet unit:
1. Ball shaped air outlet
The unit adopts a spherical nozzle with superior jet performance as the air supply outlet, which can achieve long-distance air supply without air ducts.
The air outlet direction of the spherical air outlet can be selected from two ways: horizontal and vertical air supply. Especially suitable for high-rise spaces, especially for warm air delivery in large workshops.
2. Low initial investment and easy installation
The remote jet unit adopts a spherical nozzle design, with a long air supply distance and wide coverage. The air supply angle can be manually or automatically adjusted within a range of ± 30%. It has achieved long-distance direct air supply without air ducts, without the need to install air ducts, fully saving investment costs. Installation without air ducts greatly saves space and is easy to install.
The remote jet unit series is particularly suitable for the following situations:
1) Large space, hoping to reduce one-time investment and save on air conditioning operating costs;
2) In situations where it is not allowed to install air ducts or where it is difficult to install air ducts in the upper indoor space;
3) In situations where it is difficult to deliver hot air in large spaces.
For example: large supermarkets, factory workshops, sports venues, swimming pools, waiting halls, exhibition halls, lobbies, etc.
Design and selection of remote jet unit
The remote jet unit using a spherical nozzle as the air supply outlet is different from the ordinary ceiling air conditioning unit. This type of air conditioning unit does not connect to an air duct and is mainly used for long-distance direct air supply. The thermal performance parameter calculation of the air conditioning unit is the same as that of the ordinary air conditioning unit, and the design selection is mainly based on air flow organization calculation.
For a certain building, when the air supply distance, installation height of the air conditioning unit, air supply temperature, indoor temperature, and air supply volume are roughly determined, it is necessary to choose a suitable remote jet unit so that the cold and hot jets emitted by the unit's air outlet can meet the following requirements:
1. Send cold and hot air to the designated location;
2. The cold jet will not fall halfway, causing discomfort to the human body;
3. Hot air can reach the required supply distance and position;
4. The temperature difference at the end meets the design requirements;
The design selection should consider the mutual influence and joint action between the air supply ports of multiple remote jet units. The diffusion width of the jet is approximately 0.4 times the range, and the unit layout density should be slightly smaller than the diffusion width. If the unit is tightly attached to the ceiling, the impact of attachment should be considered, and the range of attachment airflow is about 1.4 times that of general airflow.