Room temperature control collector

Wireless Room Temperature Collector

This product is a wireless room temperature collector based on NB-10T technology, which is the user end of a heating metering device used to monitor indoor temperature. Installed indoors for measuring and displaying indoor temperature; The wireless temperature collector is responsible for receiving temperature data from the wireless temperature sensor in the wireless temperature measurement system, and uploading the collected temperature data to the control center through NB-l0T. The control center does not require other receiving devices, and the staff in the control center can monitor the temperature changes at the collection point anytime and anywhere, making it easy to adjust the balance of the temperature system.

Socket type wireless room temperature collector

The socket type wireless room temperature collector is a wireless room temperature collector based on NB-10T technology, which is the user end of the heating metering device used to monitor indoor temperature. Installed indoors for measuring and displaying indoor temperature; The wireless temperature collector is responsible for receiving temperature data from wireless temperature sensors in the wireless temperature measurement system, and uploading the collected temperature data to the control center through NB-l0T. The control center staff can monitor the temperature changes at the collection points anytime and anywhere, making it easier to adjust the balance of the temperature system. It is a standard 86 box installation method, with a five hole socket used for mains power supply.

Wireless room temperature controller

The room temperature controller is the user end of the smart heating device, used for collecting, adjusting, and controlling indoor temperature. Installed in the user's room, the room temperature controller communicates directly with the valve through LoRa wireless communication. While collecting the indoor temperature, it can also collect the opening value of the heating valve for that household. When the room temperature is higher or lower than the user's set temperature value, the control panel will output a wireless signal to the IoT regulating valve for that household. The regulating valve will open or decrease the valve opening in real time according to the instructions, thereby achieving the goal of regulating the room temperature, making the room comfortable, and energy-saving.

Switch type wireless room temperature collector

The switch type room temperature collector is a wireless room temperature collector based on NB-10T technology, which is the user end of the heating metering device used to monitor indoor temperature. Installed indoors for measuring and displaying indoor temperature; The wireless temperature collector is responsible for receiving temperature data from wireless temperature sensors in the wireless temperature measurement system, and uploading the collected temperature data to the control center through NB-I0T. The control center staff can monitor the temperature changes at the collection points anytime and anywhere to adjust the balance of the temperature system. It is a standard 86 box installation method, and the light control switch is used to turn on and off the lights. It can directly replace the old switch at home and supports single and double control.