-
Phone
13852210796
-
Address
No. 26 Dongfanghong East Road, Jiangdu District, Yangzhou City
Product Categories
Jiangdu District Tiancan Experimental Machinery Factory
Rubber compression deformation tester
NegotiableUpdate on 07/09
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
The rubber compression deformation tester consists of parallel steel plate limiters and fasteners, which comply with the requirements of GB7759 and ISO815. It is used to measure the deformation of vulcanized rubber and thermoplastic rubber under normal temperature, high temperature, and low temperature conditions at a certain compression rate for a certain compression time.
Product Details
Oneoverview
Rubber compression deformation testerComposed of parallel steel plate limiters and fasteners, in compliance with GB7759 and ISO815 requirements, used for vulcanized rubber,
Thermoplastic rubber is measured for its deformation at room temperature, high temperature, and low temperature, with a certain compression rate and a certain compression time.
IITechnical parameters:
1. Sample:
Type A diameter 29mm, height 12.5mm
B-type diameter 13mm, height 6.3mm
2. Height limiter: Sample type A B
When the compression ratio is 25%, it ranges from 9.3 to 9.4 and from 4.7 to 4.8
10.6-10.7 5.3-5.4 at a compression ratio of 15%
When the compression ratio is 10%, it ranges from 11.25 to 11.3 and from 5.65 to 5.7
3. Dimensions: Diameter 115mm, Height 110mm
4. Weight: 10Kg
