SYCSG-1 speed sensor

1. SYCSG-1 speed sensor SYCSG-1 speed sensor

2. Introduction:

3. Magnetic reluctance speed sensorUsing the principle of electromagnetic induction to achieve speed measurement. This sensor has strong output signal, good anti-interference performance, easy installation and use, and can be used in harsh environments such as smoke, oil and gas, water and gas.

4. Electrical indicators:

5. DC resistance: 200 to 550 Ω (25 ℃)

6. Working temperature: -10 to+120 ℃

7. Physical indicators:

8. Weight: Approximately 120g

9. Anti vibration: 20g

10. Thread specification: M16 × 1

11. Gear material: Gear materials should be made of metal materials with strong magnetic permeability.

12. tooth profile：Forming an involute tooth profile is an appropriate tooth profile. Using large modulus gears or other tooth profiles will result in significant waveform distortion, which will hinder the measurement of * * *. If the spindle has axial movement, it should be noted that the center of the magnetic pole should be at the center position of the gear.

Gear module: 2 to 4 tooth width b: greater than 5mm.

1. environmental indicators：

2. work make, do, create, compose, write, etc. Wen Degree:-10to+120℃

3. Ordering Guide:

4. XG-2-AXX—BXX—CXX—DXX

Sensor length AXX: 01-60mm

02-80mm

03-120mm

04-Special specifications (length 300mm)

Thread specification BXX: 01-M16 × 1

02-Special specifications

Cable length CXX: ordered in increments of 1 meter, for example: 010=1.0m,

Default 2m

Connector options DXX: 0 1- Direct lead wire

0 2-aviation connector

1. Introduction:

2. Magnetic reluctance speed sensorUsing the principle of electromagnetic induction to achieve speed measurement. This sensor has strong output signal, good anti-interference performance, easy installation and use, and can be used in harsh environments such as smoke, oil and gas, water and gas.

3. Electrical indicators:

4. DC resistance: 200 to 550 Ω (25 ℃)

5. Working temperature: -10 to+120 ℃

6. Physical indicators:

7. Weight: Approximately 120g

8. Anti vibration: 20g

9. Thread specification: M16 × 1

10. Gear material: Gear materials should be made of metal materials with strong magnetic permeability.

11. tooth profile：Forming an involute tooth profile is an appropriate tooth profile. Using large modulus gears or other tooth profiles will result in significant waveform distortion, which will hinder the measurement of * * *. If the spindle has axial movement, it should be noted that the center of the magnetic pole should be at the center position of the gear.

Gear module: 2 to 4 tooth width b: greater than 5mm.

1. environmental indicators：

2. work make, do, create, compose, write, etc. Wen Degree:-10to+120℃

3. Ordering Guide:

4. XG-2-AXX—BXX—CXX—DXX

Sensor length AXX: 01-60mm

02-80mm

03-120mm

04-Special specifications (length 300mm)

Thread specification BXX: 01-M16 × 1

02-Special specifications

Cable length CXX: ordered in increments of 1 meter, for example: 010=1.0m,

Default 2m

Connector options DXX: 0 1- Direct lead wire

0 2-aviation connector