SYD-2806E Asphalt Softening Point Tester (Computer Automatic)

The main features of the asphalt softening point tester (computer automatic) are:
1. The temperature is controlled by the instrument and there is no human error.
2. External temperature probe, sensitive to temperature response.
3. The speed is controlled by PID and fuzzy logic algorithm, with linear heating.
4. New appearance, more convenient operation.
5. Equipped with a magnetic stirring device, the test temperature is more uniform.
6. Record the test results automatically and manually, and calculate the average value automatically.

Technical parameters of asphalt softening point tester (computer automatic):
1. Temperature measurement range: 0-99 ℃
2. Test range: 5-90 ℃
3. Heating rate: (5 ± 0.5) ℃/min
4. Heating method: The heating rate is controlled by PID and fuzzy logic algorithm, and magnetic stirring is used
5. Detection methods: automatic and manual detection
6. Steel ball mass: 3.5g ± 0.5g
7. Steel ball diameter: 9.53mm
8. Steel ball sinking: 25.4mm
9. Environment: JTG E20-2011 standard procedure
10. Timing range: 0-99 minutes and 99 seconds
11. Temperature measurement accuracy: 0.2 ℃
12. Execution standards: GB/T4505, ASTMD36, T0606-2011
13. Dimensions: 340 * 230 * 340mm
14. Weight: 4.5kg
15. Power supply voltage: AC220V/50HZ
16. Power: 800W
17. Environmental temperature: 5-40 ℃
18. Environmental humidity: ≤ 85%

1. Temperature measurement range: 0-99 ℃
2. Test range: 5-90 ℃
3. Heating rate: (5 ± 0.5) ℃/min
4. Heating method: The heating rate is controlled by PID and fuzzy logic algorithm, and magnetic stirring is used
5. Detection methods: automatic and manual detection
6. Steel ball mass: 3.5g ± 0.5g
7. Steel ball diameter: 9.53mm
8. Steel ball sinking: 25.4mm
9. Environment: JTG E20-2011 standard procedure
10. Timing range: 0-99 minutes and 99 seconds
11. Temperature measurement accuracy: 0.2 ℃
12. Execution standards: GB/T4505, ASTMD36, T0606-2011
13. Dimensions: 340 * 230 * 340mm
14. Weight: 4.5kg
15. Power supply voltage: AC220V/50HZ
16. Power: 800W
17. Environmental temperature: 5-40 ℃
18. Environmental humidity: ≤ 85%

The softening point meter is a digital display with magnetic stirring function. When the steel balls fall to the bottom, they need to be manually observed and stopped by pressing a button. When both steel balls fall, the average value is automatically displayed. The E-softening point tester has an automatic detection function on the basis of the D-type. When the steel ball falls, the instrument can automatically detect it, and when both steel balls fall, the test can be automatically ended. The F-type softening point analyzer has been replaced with a LCD screen display based on the E-type, which further reflects the high-end nature of the instrument, is non irritating to the human eye, and has all the characteristics of the E-type. It can be configured with a printer and has a computer interface. The G-type softening point is a high-temperature type, which can be tested at 180 degrees Celsius and manually detected on the LCD display. The H-type softening point is equipped with a printer and computer interface on the basis of the G-type.