-
E-mail
980349543@qq.com
-
Phone
13568829945
-
Address
Room 402, 4th Floor, No. 6 Tianba East Street, Deyuan Town (Jingrong Town), Pidu District, Chengdu City
Product Categories
- Monitoring of sprinkler truck valve switch
- Initial velocity testing system for muzzle
- Multi unit battery pack charging and discharging monitoring
- Hazardous Chemicals Simulation Testing System
- Pressure and flow synchronous monitoring system
- Gas dust explosion characteristic testing system
- Monitoring system for sand mining vessel
- Detonation timing system
- Multi parameter physical quantity acquisition system
- Light curtain target speed measurement system
Chengdu Keda Shengying Technology Co., Ltd
Safety Engineering Hazardous Chemicals Simulation Test System
NegotiableUpdate on 01/08
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
The simulation test system for hazardous chemicals in safety engineering studies the essential conditions for combustion and explosion of hazardous chemicals such as oil, gas, dust, etc. under different process operation conditions during transportation and storage. For example, experimental research on combustion characteristics such as gasoline tank fires and flowing fires, as well as fire prevention and explosion relief devices and explosion suppression performance evaluations, all require monitoring of parameters such as explosion pressure, flame temperature, thermal radiation, and gas concentration.
Product Details
Safety Engineering Hazardous Chemicals Simulation Test SystemIntroduction
Research on the essential conditions for combustion and explosion of hazardous chemicals such as oil, gas, and dust under different process operating conditions during transportation and storage, such as experimental studies on combustion characteristics such as gasoline tank fires, flowing fires, flame arresters, and explosion suppression performance evaluations, all require monitoring of parameters such as explosion pressure, flame temperature, thermal radiation, and gas concentration.
This type of project requires dozens to hundreds of sensors, each with different electrical output performance. During testing, on-site wiring is often required, synchronous data collection is required, and high-speed cameras are controlled to trigger synchronously.
(Typical configuration)
name call, name, say, weigh |
Multi channel data acquisition system |
Synchronous trigger |
KTheJType armored thermocouple/Shielding compensation wire |
Heat flow sensor/Flame retardant wire |
Shock wave pressure sensor |
Thermocouple (testing environment distance temperature) |
Gas concentration sensor |
Handheld digital wind speed/temperature/hygrometer |
High definition video recorder |
Verification board and support frame, combustion bench, sensor testing bracket |
Laptop computer（i7The processor,2THard drive) |
ignition device |
Safety Engineering Hazardous Chemicals Simulation Test Systemblock diagram
Chengdu Keda Shengying Technology Co., Ltd. is an original research and development company with its own intellectual property rights. It integrates research and development, production, and sales. The company has been focusing on the application of advanced electronic technology in the field of measurement and control for more than ten years. It has a loyal customer base in military and safety engineering research institutes and has built hundreds of transient testing systems and laser light curtain speed measurement systems using its own products.
Following the trend of global sensor technology development and in response to the opportunities brought by the rapid development of the Internet of Things, the company combines embedded SOC on-chip systems with network communication and analog/digital signal processing to develop a high-performance IoT node (front-end) platform based on SOC technology. A transient signal testing system based on TCP/IP gigabit MCU, used for time and speed measurement in multiple national defense key scientific research projects.
The series of intelligent pressure/composite sensors have broken through technical bottlenecks such as compensation and correction of high-performance pressure sensors. Their stability and reliability have reached and some indicators are better than foreign products, breaking the monopoly of foreign countries in high-precision pressure sensors (scientific research). Member of the Chengdu Intelligent Sensor Special Committee and one of the drafters of the General Protocol for Data Interaction of Water and Sand Measurement Instruments in Model Experiments.
Similar Product Recommend