Salt spray testing chamber

NegotiableUpdate on 01/04

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The salt spray testing chamber is designed to test the corrosion resistance of various materials after surface treatment, including coatings, electroplating, inorganic and organic films, anodizing, rust proof oil, and other anti-corrosion treatments.

Product Details

Salt spray testing chamber

Product Introduction

　　Salt spray testing chamberIt is aimed at surface treatment of various materials, including coatings, electroplating, inorganic and organic films, anodizing, anti rust oil and other anti-corrosion treatments, to test the corrosion resistance of their products.

Control method

KB-Y-60 adopts Bernoulli principle to absorb salt water and then atomize it uniformly, which can prevent crystallization and ensure the standard of continuous testing.

2. Nozzle: made of special glass nozzle, which can adjust the size of spray volume and spray angle.

3. spray volume: spray tower is set in the middle of the laboratory to make the fog fall evenly, and can be adjusted to 1~2 ml 80 cm2/hr (16 hour average volume)

Technical Specifications

studio dimensions	600×400×450 mm （L×W×H）
Analysis accuracy	± 0.1℃
control accuracy	± 1.0℃
Distribution accuracy	± 2.0℃
Test Method	1. Salt water spray test: NSS, ACSS (1) Laboratory: 35 ℃± 1 ℃ (2) Saturated air tank: 47 ℃± 1 ℃ 2. Acetate salt spray test: NSS, ACSS (1) Laboratory: 50 ℃± 1 ℃ (2) Saturated air tank: 63 ℃± 1 ℃ Add acetic acid with ice to adjust the pH value of the test solution to 3.1~3.3 3. Copper speed test: CASS (1) Laboratory: 58 ℃± 1 ℃ (2) Saturated air tank: 65 ℃± 1 ℃ Add acetic acid with ice to adjust the pH value of the test solution to 3.1~3.3, and mix with 0.02~0.025% copper chloride

product structure

laboratory	Using P.V.C polyvinyl chloride board with a thickness of 5mm and a temperature resistance of up to 80 ℃
sealing cover	Using acrylic impact resistant board with a thickness of 6mm and a transparent sealing cover, the condition of the tested product can be observed in real time
pressure tank	Adopting SUS # 304 stainless steel high-pressure resistant barrel, with excellent insulation effect
heating system	Using imported stainless steel finned heat pipe U-Type electric heater to heat the air
shelf	Using a planar indexing frame, the angle can be adjusted arbitrarily, and the four sides are consistent in terms of falling and receiving fog, with a large number of test pieces placed.
Control Panel	◆ Laboratory temperature controller 0-99.9 ℃, LCD digital display with PID automatic calculation, control error ± 0.3 ℃ Saturated air tank temperature controller 0-99.9 ℃, LCD digital display with PID automatic calculation, control error ± 0.3 ℃ ◆ Heating tank liquid expansion safety temperature controller 0-120 ℃ ◆ Saturated air tank liquid expansion safety temperature controller 0-120 ℃ ◆ Digital display time controller 0.1s-9990hr Accumulator 0-9990hr ◆ Rocker illuminated buckle switch, capable of continuous buckle locking 20000 times

protective device

1. Automatic power-off device when the water level is low

2. Automatic power-off device when overheating occurs

3. Attach safety warning light device

main controller

AC contactor: Taiwan, China

Thermal relay: Taiwan, China, China

Communication relay: OMRON,

Time relay: Taiwan, China, China

Controller: Taiwan, China

Over temperature protector: Taiwan, China

Main power switch: Taiwan, China

Solid state relay: Taiwan, China, China,

Button switch: Taiwan, China

Dry burn protector: Italy

Additional notes

Voltage used:	1. Power supply: AC1 ￠ 3W 220V 50/60HZ ※ Voltage fluctuation allowable value: ± 10% of the fixed voltage 2. Load capacity: 3.0KVA 3. Working current: 15A
Water requirements:	RO reverse osmosis pure water or distilled water
Usage environment:	Allow use in an environment of 0~30 ℃ Performance guarantee environment: 5~25 ℃ The installation ground should not have obvious inclination No other items can be placed within 60CM around the instrument
Accessories:	1. Four L-shaped storage racks 2. One standard measuring cylinder 3. Two temperature indicator needles 4. Six O-shaped storage racks 5. Collector 80cm 1 piece 6. One glass nozzle (please replace it regularly) 7. Sodium Chloride (NACL) 500g, 2 bottles 8. One 2.5m long low resistance rubber cable for the power cord
Items excluded from valuation:	1. Preparation project for setting up the venue 2. Input side electrical equipment 3. Natural drainage piping engineering 4. Drainage outlet equipment 5. Gas source 6. Mist exhaust port
Provide documents:	1. Provide a copy of the order specification sheet when placing an order 2. Provide a copy of the user manual upon delivery 3. Provide a copy of the product warranty card upon delivery

Common questions and answers about salt spray test chamber:

What components do they consist of?

A normal salt spray test chamber consists of 8 parts, namely: exposure chamber, humidity and temperature control, spray device, air saturator, salt spray collection device, air dryer, exhaust system, and drainage system. None of the above 8 parts is necessary. Other parts can be added according to the actual needs of customers.

What are the experimental standards?

The standard for salt spray test chamber is a clear and specific provision for the conditions of salt spray test, such as temperature, humidity, concentration of sodium chloride solution, and pH value. In addition, it also puts forward technical requirements for the performance of the salt spray test chamber.

How much does it cost per unit?

We are a manufacturer of salt spray test chambers, and there are no middlemen to profit from price differences. The price of salt spray test chambers is not fixed, and it will vary depending on the function, quantity, material, and whether it is customized. For detailed quotation plans, please feel free to call in the upper right corner of the website.

Which one is good?

The salt spray test chamber is one of the equipment used for conducting salt spray tests on products. There are many manufacturers of salt spray test chambers now, but the quality varies greatly. When choosing a salt spray test chamber, it is recommended to look for a company with high brand awareness, long establishment years, and non-standard customization capabilities. The product quality is guaranteed, and the after-sales service is relatively complete.

Guangdong Kebao Testing Equipment Co., Ltd. has been focusing on equipment such as constant temperature and humidity test chambers, constant temperature and humidity machines, cold and hot shock test chambers, high and low temperature shock test chambers, salt spray test chambers, ultraviolet aging test chambers, and sand and dust test chambers for many years. Welcome to call for consultation:

Tag: Salt Spray Test Chamber