Seismic resistant electric contact axial belt front pressure gauge (embedded type)

NegotiableUpdate on 01/20

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Technical parameters: Model: YN-60Z Brand: Shanghai Yichuan Instrument Factory SYCIF Measurement range: 0.1, 0.16, 0.25, 0.4, 0.6, 1, 1.6, 2.5, 4, 6, 10, 16, 25, 40, 6

Product Details

Technical Specifications:
Model: YNXC-100ZT
Brand: Shanghai Yichuan Instrument Factory SYCIF
Measurement range: 0.1, 0.16, 0.25, 0.4, 0.6, 1, 1.6, 2.5, 4, 6, 10, 16, 25, 40, 60, 100
Accuracy level: 1.6
Usage environment: -20~+70 ℃ (liquid flushing inside the shell) -40~+70 ℃ (no liquid flushing inside the shell)
Working voltage and contact power: YNXC-100ZT/150ZT 220V 380VAC 50VA
Quantity per item: 12 pieces

Usage description:
YNXC-100ZT/150ZT shock resistant electric contact pressure gauge is suitable for measuring the pressure of liquids, gases, and other media that do not corrode copper and copper alloys. The instrument is used in conjunction with corresponding electrical components such as relays and contactors to achieve automatic control of the measured pressure system, such as sending signals or alarms.
2. The instrument should be installed vertically at the same level as the measuring point, otherwise additional errors caused by liquid level differences should be taken into account as appropriate.
When measuring stable pressure, the instrument can be used within the range of 1/4 to 3/4 of its upper limit of scale; When measuring alternating pressure, it is advisable to not exceed 1/2 of the upper limit of the scale; This limitation is not applicable when measuring negative pressure (i.e. vacuum).
4. Before use, the instrument should be carefully verified for the degree of corrosion caused by the measured medium, in order to avoid early corrosion and rupture of the elastic components.
5. Instruments with liquid filled casings should not be used in environments with strong oxidants such as oxygen, chlorine, nitric acid, and hydrogen peroxide to avoid chemical reactions with the liquid inside the meter.
If the reading of the flushing instrument is inaccurate due to the temperature influence of the measured medium or environment, the protrusion of the protective plug on the case can be cut off (or pierced with a needle) and connected to the atmosphere.