Servo swing cylinder

Where can I find seals for servo swing oil cylinders, how to install them, and how to determine the stroke of servo swing oil cylinders? Our company is a professional manufacturer of servo swing oil cylinders, and also sells self dumping truck oil cylinders, ear axle hydraulic cylinders, elevator oil cylinders, damping track oil cylinders, and two-stage bidirectional hydraulic cylinders. In response to the problems encountered by everyone in daily life, our company will introduce them in this article.

Article Introduction:

• Basic Introduction
• Terminology Comparison
• Manufacturer Introduction
• reference price
• Maintenance and related issues

Basic Introduction to Servo Swing Cylinder

Servo swing cylinder: When purchasing a cylinder, try to understand the following parameters of the cylinder: A. cylinder diameter, rod diameter, and stroke; B. Work pressure or cylinder load; C. Working environment temperature; D. Working medium; E. Operating speed; F. Other parameters, such as connection form, installation size, etc. This is the only way to accurately and quickly find the suitable cylinder model. When the oil cylinder is in use, if defects are found in the seals and guide support rings, it should be replaced with seals of the same structure and suitable material according to the structural form of the repaired hydraulic cylinder seals. This can minimize the oil film thickness between the seals and the sealing surface and reduce the leakage of the seals. During the installation of oil cylinders, components such as pistons and cylinder heads have large mass, size, and inertia. Even with the assistance of lifting equipment for installation, due to the small required clearance, they will be forcefully inserted no matter what. Therefore, when the end of the piston or the cylinder head boss collides with the inner surface of the cylinder wall, it is easy to cause scratches. The solution to this problem is to use a specialized assembly guide tool during installation for small products with large quantities and batch sizes; For heavy, coarse, and large hydraulic cylinders, only meticulous and cautious operation can be avoided as much as possible. If a hydraulic cylinder experiences oil leakage or other malfunctions and needs to be disassembled, hydraulic pressure should be applied to move the position of the piston to any end position of the cylinder. During disassembly, improper tapping and sudden dropping should be avoided as much as possible. The surface flatness of the piston rod of the oil cylinder has not been fully treated after chrome plating: after chrome plating the surface of the piston rod, the method of polishing after plating should be changed to polishing after plating. Although this requires an increase in the thickness of the coating before grinding (usually by about 0.02 in the diameter direction), it can effectively remove chrome defects and test the adhesion of the coating. In addition, due to the micro unevenness of the grinding surface, the grooves can store lubricating oil, which not only improves wear resistance but also extends service life.

Terminology Comparison of Servo Swing Cylinder

Terminology related to servo swing oil cylinder in Chinese and English

• Speed control circuit flow control circuit
• Import pressure
• Hydraulic motor
• Pilot operated type
• Hydraulic Slave System
• Air conditioning unit
• Efficiency
• Slope Curve Slope

Introduction to servo swing cylinder manufacturers

Our company specializes in producing servo swing oil cylinders, as well as processing lifting tailboard oil cylinders, 100t hydraulic cylinders, valve type hydraulic cylinders, digital servo oil cylinders, and 120t hydraulic cylinders. After years of hard work, our company has established long-term cooperative relationships with customers in industries such as electric welding plants, drilling plants, Jinxia plants, automotive instrument factories, refineries, and pharmaceutical factories.

Reference price for servo swing cylinder

The factory price of servo swing cylinders is determined by factors such as operating speed, synchronization requirements, usage environment, and operating speed. The cost varies depending on the technical requirements, with common brands of servo swing cylinders costing between 700/yuan and 5000/yuan.

Maintenance and related issues of servo swing oil cylinder

• What valve is used to control the expansion and contraction of hydraulic cylinders
  Firstly, hydraulic control valves can be divided into directional control valves, pressure control valves, and flow control valves. And the valve that controls the extension and contraction of the hydraulic cylinder you mentioned is the directional control valve, also known as the directional valve. What do the two position three-way and three position four-way of the directional valve mean? Usually, it can be divided into two position valves, three position valves, and multi position valves according to the different working positions that the valve core can stay in after moving. According to the different number of slide valve channels, it can be divided into two-way valves, three-way valves, four-way valves, four-way valves, and multi way valves. The name of a directional valve is called a multi position multi way directional valve according to its working position and number of channels. Why can some valves still release pressure normally? This is closely related to the structural characteristics of the directional valve. Different slide valve directional valves have different center position machines
• How to repair hydraulic shearing machine oil cylinder leakage
  Usually, the hydraulic cylinder is disassembled and the sealing ring is replaced. There are generally two installation methods for the end caps of hydraulic cylinders. Larger hydraulic cylinders often use flange plates, which are screwed onto the middle cylinder body with a few bolts. Remove the bolts and slowly pull out the cylinder cover. The smaller hydraulic cylinder has a threaded connection between the cylinder body and cylinder head, and the rotating end cap can be removed from the cylinder body. If you are not very familiar with hydraulic cylinders, it is best to hire someone to handle it. The disassembly process can easily damage the sealing ring and internal surface.
• How to distinguish between bucket hydraulic cylinder and boom hydraulic cylinder
  According to its installation and connection, it can be distinguished that one end of the bucket hydraulic cylinder is connected to the bucket; The boom hydraulic cylinder is not connected to the bucket. A shovel refers to a bucket installed on an excavator for use, also known as a digging bucket. It is divided into a backhoe bucket and a front shovel bucket according to its working mode, with the commonly used being a backhoe bucket. The boom and arm refer to a working device of an excavator, usually also known as the upper arm or lower arm, which is mainly used to control the excavation, loading and other actions of the excavator bucket. The arm connected to the rack is relatively long, so it is commonly known as the boom, and its terminology is called the boom; The arms connected to the digging bucket are relatively small, so they are commonly known as small arms, and the terminology is called bucket rods, so they are commonly referred to as large and small arms.
• Mechanical processing: How to process the inner hole of this oil cylinder?
  Since the size requirements for the inner hole of the oil cylinder must be very high, such a long car will definitely not meet the requirements. Only by using rolling method can you solve your problem. Make a rolling head! Surface roughness and roundness can both be solved.