Shoe sole wear tester

Product Name: Shoe sole wear tester

Product Model:HT-1020

Compliant with standards: DIN-53516, JIS-K6369, GB/21447, GB/T9867 GBT20991-2007, ASTM D5963-2004

Product Description：Shoe sole wear testerSuitable for measuring the wear of materials such as elastic materials, rubber, tires, conveyor belts, shoe soles, soft synthetic leather, leather, etc., it has the characteristics of high efficiency, good reproducibility, and easy operation. The testing method is to measure the abrasion resistance of the sample by rubbing it against a certain level of sandpaper at a certain angle between the sample and the sandpaper under a specified contact pressure and a given area. The sandpaper bag is attached to the surface of the drum, and the sample is tightly pressed onto the drum with sandpaper, causing the sample to move laterally along the drum. Wear is generated at one end of the cylindrical sample, and the mass loss value of the sample is measured, and the volumetric wear is calculated from the density of the sample.

Shoe sole wear testerSpecification parameters:

Test piece: φ 16mm, 6-15mm (D)
Fixture load: 2.5N
Weight load: 2.5 ± 0.1N, 5 ± 0.1N
Lateral displacement of fixture: 4.2mm/roller per turn
Roller diameter: ￠ 150mm
Roller length: 460mm
Roller speed: 40 ± 1r/min
Travel reservation: 40m/20m
Wear rate: 0.32m/sec
Tilt angle: 3 ° Angle between the support axis of the test piece and the vertical plane of the roller
Volume: 70 × 30 × 30cm
Weight: 61kg
Power supply: 1 ∧, AC220V,3A