Sichuan Double Column Traffic Sign Pole

NegotiableUpdate on 09/28

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Sichuan Yonghui Sign Factory specializes in the production of sign poles, traffic sign poles, traffic road benchmarks, road benchmarks, highway sign poles, national highway sign poles, double (single) hanging wall sign poles and other products, with a complete and scientific quality management system

Product Details

Sichuan Yonghui Sign Factory specializes in producing sign poles, traffic sign poles, traffic road benchmarks, road benchmarks, highway sign poles, national highway sign poles, double (single) hanging wall sign poles and other products, with a complete and scientific quality management system. Yonghui's integrity, strength, and product quality have been recognized by the industry. Welcome friends from all walks of life to visit, guide and negotiate business.

HIGH-END Customer 5 major process flows - detail assurance

	01 Steel plate cut 01. Ensure compactness and compactness at the joints of aluminum plates. 02. The grinder grinds the protruding rivet heads to be flush with the aluminum plate 03. Use a polishing machine to polish the surface of the aluminum plate. 04. Rinse with clean water and use a scouring pad to scrub the surface of the board. 05. Place the aluminum plate outdoors to dry.
02 Benchmark assembly welding 1. Welding During welding, perform straight seam welding on the bent pipe seam. As welding is semi-automatic, the welder should have a greater sense of responsibility and adjust the welding position at any time to ensure the straightness of the weld seam. 2. Repair and polish Repair polishing is the process of repairing defects in the pipe blank after automatic welding. Repair personnel should inspect each one, hot-dip galvanized road traffic benchmark factory, and repair any defective areas. After the repair welding is completed, it should be polished, and the polished joints should be basically the same as those of automatic welds.
	03 Classification of Traffic Sign Posts Traffic sign poles generally include single column traffic sign poles and multi column traffic sign poles. The inner edge of the column sign should not intrude into the road construction limit, and generally should be no less than 25cm away from the outer edge or dirt shoulder of the roadway or sidewalk The height of the lower edge of the traffic sign board from the road surface is divided into two categories: not less than 5500mm for highways, and not less than 5000mm for national and provincial highways. When installed on urban roads with a large proportion of small cars, the height of the lower edge from the ground can be effective according to the actual situation, but should not be less than 120cm. When set on the roadside with pedestrians and non motorized vehicles, the height should be greater than 180cm.
04 Storage and transportation 01. Once the production is completed, it should be stored indoors in a well ventilated and dry environment for 24 hours before being removed from the outdoors and left for another 24 hours. 02. During transportation, ensure that the signboard is placed vertically. Long distance transportation should have rain protection measures to prevent rainwater from accumulating on the surface of the reflective film for a long time. 03. The large layout signboard needs to be fixed with reinforcing ribs during transportation to prevent wrinkles at the joints of the aluminum plate.
	05 Traffic Benchmark Standards The main standard for traffic sign posts is based on GB/T 23827-2009 Road Traffic Sign Boards and Supporting Components, while also considering the following standards: 05MR601 Urban Road Traffic Signs and Routes GB 5768.1-2009 Road Traffic Signs and Markings Part 1: General Provisions GB 5768.2-2009 Road Traffic Signs and Markings Part 2: Road Traffic Signs GB 5768.3-2009 Road Traffic Signs and Markings Part 3: Road Traffic Markings GB/T 5845.1-2008 Urban Public Transport Signs Part 1: General Signs and Classification Signs GB/T 5845.2-2008 Urban Public Transport Signs Part 2: General graphic symbols and safety signs GB/T 5845.3-2008 Urban public transport signs Part 3: Public Bus and Tram Stop Signs and Road Signs GB/T 5845.4-2008 Urban Public Transport Signs Part 4: Operational tools, stations (docks) and route graphic symbols GB 5845.5-1986 Urban Public