-
E-mail
hsupen@ms14.hinet.net
- Phone
-
Address
No. 351 Fuyang Road, Fengyuan District, Taichung City
Product Categories
Xuben International Precision Machinery Co., Ltd
Single arm five axis cradle type indexing disc
NegotiableUpdate on 03/26
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
Single arm five axis cradle type indexing disc
Product Details
Specification Table
| model | unit | FSA-170 | |||
|---|---|---|---|---|---|
| Disk diameter | mm | Ø170 | |||
| Diameter of the central hole on the disc surface | mm | Ø40H7 | |||
| Central hole penetration diameter | mm | Ø40 | |||
| 90 ° vertical height | mm | 160 | |||
| 0 ° horizontal height | mm | 220 | |||
| Center to disk | mm | 60 | |||
| Width of T-shaped groove on the surface | mm | 12H7 | |||
| Tilt axis guide key width | mm | 18h7 | |||
| Minimum set angle | deg. | 0.001 | |||
| Server motor model | Motor brand |
tilt axis |
Rotating axis (straight axis) | ||
| FANUC | α8i / ß12is | α4i / ß8is | |||
| Mitsubishi | HF-154S | HF-154S | |||
| Segmentation accuracy | sec. | 60 | 20 | ||
| repeatability | sec. | 8 | 6 | ||
| Locking torque | N.m | 600 | 250 | ||
| Locking method | kg/cm² | 35 (oil pressure) | 5-7 (air pressure) | ||
| Gear ratio | - | 1:120 | 1:90 | ||
|
Maximum disk speed (Calculated based on FANUC alpha motor) |
rpm | 22.2 | 33.3 | ||
| Allowable load capacity | 0 ° horizontal | kg | 60 | ||
| Tilt from 0 ° to 90 ° | kg | 45 | |||
| Allowable cutting force (Locked state) |
F | N | 7000 | ||
| FxL | N.m | Oil pressure: 350 Air pressure: 200 | |||
| FxL | N.m | Oil pressure: 400 Air pressure: 300 | |||
| Turbine locking torque | N.m | 600 | 200 | ||
| Tiltable angle | deg. | ±120 | |||
| Permissible consistency | J=W.D²/8 | kg.m² | 0.20 | ||
| Turntable weight (excluding motor) | kg | 177 | |||
*Our company reserves the right to change product specifications, dimensions, and design features without prior notice.
Appearance dimension diagram
