Six cubic and ten cubic ethylene oxide sterilizers, large ethylene oxide sterilization cabinets

NegotiableUpdate on 08/12

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Introduction: The GC-H series ethylene oxide sterilizer is a computer-controlled fully automatic sterilization equipment developed and produced by our company. Its technical level and manufacturing process are leading in China. The product is composed of a microcomputer control system, residual gas treatment device, and sterilization studio. When used only

Product Details

The GC-H series ethylene oxide sterilizer is a computer-controlled fully automatic sterilization equipment developed and produced by our company. Its technical level and manufacturing process are leading in China. The product consists of a microcomputer control system, residual gas treatment device, and sterilization studio. When in use, simply press the run button twice to achieve complex processes such as automatic heating, vacuuming, vaporization, sterilization, and residue removal, which is very convenient and safe, with sterilization almost reaching 100%. At the same time, the ethylene oxide mixed gas used in the equipment has the characteristics of * flame retardant, * explosion-proof, * strong penetration, * high-efficiency broad-spectrum sterilization, * short sterilization time, * non corrosive, * non residual toxic, * non polluting the environment, etc. This product has unique advantages in sterilizing and disinfecting items that are sensitive to moisture and heat. At present, it is widely used in the fields of medical and health care, industry, foreign trade, commerce, banking, archaeology, archaeological archive management, and cultural relic management.

Main performance parameters of GC-H6000 ethylene oxide sterilizer equipment
1. Main parameters
Inner layer size: 3350X1200X1500
Outer dimensions: 3700X1700X2200
Power supply: 380V, 25KW
Work pressure: -60KPa-0
2. Main configuration

Serial Number	name	Related parameters	notes
1	Box section (Main components)	Inner liner: SUS304 stainless steel 2 Water jackets: 16 # channel steel Q235 material on both sides and top surface 3. Shell cladding: SUS304 stainless steel, δ=1.2mm 4 Foot: Channel steel 16 #/Q235 5 Foot support: Steel plate 10/Q235 6 Insulation layer: Combustion supporting polystyrene
2	Door body part (Main components)	1. Door body: SUS304 stainless steel 2-door water jacket: 16 # channel steel Q235 material 3 door frame: rectangular steel 120 * 60/Q235 4 door sealing flanges: steel plate 60/Q235 5-door guide rail trailer: rectangular steel 80 * 60/Q235 6 door body guide rails: pipe diameter 28 × 4/Q235 7 hooks: Q235 8. Shell cladding: SUS304 stainless steel, δ=1.2mm 9. Insulation layer: Aluminum silicate fiber blanket 10 Pneumatic sliding door, single door, automatic door opening and closing.
3	Control rack (Main components)	1 rack: angle steel 5110cm × 100cm × 175cm 2 Water tank: SUS304 steel plate 3mm 3 Hot water circulation system (pipeline): galvanized pipe 4 Heater: U-shaped stainless steel seamless tube (9KW)
4	vaporizer	1. Heating inner cylinder: SUS304 steel plate with a diameter of 250 × 4 2 EO pipes: φ 22 × 2 pipes/stainless steel 3. Insulation outer cylinder: stainless steel 4. Insulation layer: Aluminum silicate fiber blanket
5	EO input port	Inside the cabinet, 2 EO inputs are needed
6	EO investment amount	EO input can be automatically controlled by pressure and weight;
7	Temperature control in sterilization room	Quantity: There are two temperature sensors installed on the box, one for monitoring and one for efficiency matching, and an independent ultra-high temperature alarm device is provided; According to the sterilization process requirements, it can be set arbitrarily between 0~80 ℃
8	pressure control	There are two pressure sensors installed on the box, one for monitoring and the other for calibration, and an independent ultra-high pressure alarm device is provided
9	Humidity control	Install a humidity sensor on the box, one for monitoring. Humidity control humidification can be selected. Humidity control humidification is generally set between 30~70% RH, and can be set arbitrarily between 0~100% RH, automatically controlled. Pressure controlled humidification can rely on pressure changes to control humidification, and can automatically shield humidity values.
10	automatic control EO input temperature and input amount	Preset EO gasification temperature (45 ℃ -50 ℃) Weight can control the amount of EO input, and pressure can also control the amount of EO input
11	Preheating/Analysis (Number of permutations)	Introduce filtered air or inert gas to atmospheric pressure, then evacuate the sterilization chamber and repeat alternately multiple times
12	Preheating/Analysis (Time permutation)	The method of continuously flowing filtered air through the sterilization chamber to remove ethylene oxide gas.
13	Computer fully automatic control Manually control two operating modes	1. Human Computer Interaction Interface 2. Fully automatic control of sterilization process 3. Automatic alarm and automatic safety prompt

Main performance parameters of GC-H10 cubic ethylene oxide sterilizer equipment
1. Main parameters
Inner layer size: 4500X1350X1700
Outer dimensions: 4950X1900X2400
Power supply: 380V, 60KW
Work pressure: -60KPa-0
2. Main configuration

Serial Number	name	Related parameters	notes
1	Box section (Main components)	Inner liner: SUS304 stainless steel 2 Water jackets: 16 # channel steel Q235 material on both sides and top surface 3. Shell cladding: SUS304 stainless steel, δ=1.2mm 4 Foot: Channel steel 16 #/Q235 5 Foot support: Steel plate 10/Q235 6 Insulation layer: Combustion supporting polystyrene
2	Door body part (Main components)	1. Door body: SUS304 stainless steel 2-door water jacket: 16 # channel steel Q235 material 3 door frame: rectangular steel 100 * 80/Q235 4 door sealing flanges: steel plate 80/Q235 5-door guide rail trailer: rectangular steel 100 * 80/Q235 6 door body guide rails: pipe diameter 32 × 4/Q235 7 hooks: Q235 8. Shell cladding: SUS304 stainless steel, δ=1.2mm 9. Insulation layer: Aluminum silicate fiber blanket 10 Pneumatic sliding door, single door, automatic door opening and closing.
3	Control rack (Main components)	1 rack: angle 5900cm × 135cm × 170cm 2 Water tank: SUS304 steel plate 3mm 3 Hot water circulation system (pipeline): galvanized pipe 4 Heater: U-shaped stainless steel seamless tube (9=64KW)
4	vaporizer	1. Heating inner cylinder: SUS304 steel plate with a diameter of 300 × 4 2 EO pipes: φ 25 × 2 pipes/stainless steel 3. Insulation outer cylinder: stainless steel 4. Insulation layer: Aluminum silicate fiber blanket
5	EO input port	Inside the cabinet, 2 EO inputs are needed
6	EO investment amount	EO input can be automatically controlled by pressure and weight;
7	Temperature control in sterilization room	Quantity: There are two temperature sensors installed on the box, one for monitoring and one for efficiency matching, and an independent ultra-high temperature alarm device is provided; According to the sterilization process requirements, it can be set arbitrarily between 0~80 ℃
8	pressure control	There are two pressure sensors installed on the box, one for monitoring and the other for calibration, and an independent ultra-high pressure alarm device is provided
9	Humidity control	Install a humidity sensor on the box, one for monitoring. Humidity control humidification can be selected. Humidity control humidification is generally set between 30~70% RH, and can be set arbitrarily between 0~100% RH, automatically controlled. Pressure controlled humidification can rely on pressure changes to control humidification, and can automatically shield humidity values.
10	automatic control EO input temperature and input amount	Preset EO gasification temperature (45 ℃ -50 ℃) Weight can control the amount of EO input, and pressure can also control the amount of EO input
11	Preheating/Analysis (Number of permutations)	Introduce filtered air or inert gas to atmospheric pressure, then evacuate the sterilization chamber and repeat alternately multiple times
12	Preheating/Analysis (Time permutation)	The method of continuously flowing filtered air through the sterilization chamber to remove ethylene oxide gas.
13	Computer fully automatic control Manually control two operating modes	1. Human Computer Interaction Interface 2. Fully automatic control of sterilization process 3. Automatic alarm and automatic safety prompt