Six digit digital automatic lifting mixer

The JJ-4A six link asynchronous automatic lifting electric mixer is driven by a single motor, and the six link motors can be operated simultaneously or separately. When in use, the height of the motor and mixing rod can be adjusted as needed

The JJ-4A six link asynchronous automatic lifting electric mixer is driven by a single motor, and the six link motors can be operated simultaneously or separately. When in use, the height of the motor and mixing rod can be adjusted as needed.

This product is designed and produced according to user needs, with constant speed regulation, speed digital display, and timing and speed regulation. The motor adopts permanent magnet DC motor, which has the characteristics of low noise, obvious speed regulation, and huge low-speed operating force. The stirring rod is made of stainless steel, which enhances its corrosion resistance. Widely applicable to scientific research, environmental protection, health, petroleum, metallurgical water plants, as well as laboratories in various colleges and universities.

The JJ-4A six link asynchronous automatic lifting electric mixer is driven by a single motor, and the six link motors can be operated simultaneously or separately. When in use, the height of the motor and mixing rod can be adjusted as needed.

When using this instrument, first check if all the accessories accompanying the machine are complete, then install the mixing rod on each of the six shafts, tighten them, and turn off all the work switches. And adjust the speed knob to the lowest position, place the solution bottle to be stirred on the machine base, turn on the power, close the power switch, turn on the lifting switch, adjust to the appropriate height, and align the stirring rod with the center. Turn the timing knob to the ON position or the desired timing time, turn on the motor power, and gradually adjust from low speed to high speed to the desired working speed. .

precautions:

1. Using at medium speed within the speed range can extend the lifespan of the instrument.

2. Before using the instrument, place the speed control knob in the minimum position.

3. Connect the power and slowly adjust the speed control knob to the desired speed

4. Before each shutdown, the timer knob should be turned to the "zero" position and the speed control knob should be placed in the minimum position.

5. The lifting height is controlled by a switch Up is up, down is down, and in the middle is a stop, which can be stopped at any position

Multi head mixing, can be done simultaneously or separately, automatic lifting, timed function,

Motor power: 6 * 30W,

Mixing volume: 6 * 1000ml,

Speed: Start at -2800 rpm, with digital display.