Six sided press machine Cubic Press

German Max Voggenreiter MAVO LPQ6-2400 six sided top press machine, equipped with 6 independently controllable working pistons, facing each other in pairs,Apply pressure to the sample from XYZ directions separately.

Six working pistons are independently controlled to apply different pressures in the XYZ directions, and the deformation and dislocations of the sample under high pressure are studied.

LPQ6-2400The six sided top press machine does not require a Walker/Kawai module or DIA/D-DIA module equal pressure device. The six oil cylinders drive the working piston to directly act on the sample, avoiding pressure loss caused by friction.

Max Voggenreiter from Germany can also provide other six sided top press machines of different tonnages according to user requirements.

At the same time, the LPQ6-2400 six sided top press machine can be installed as a whole on a six axis synchronous displacement table, achieving precise three-dimensional movement and rotation at the micrometer level, and can be used in conjunction with synchrotron radiation.

Main features:

— 6A working piston of the same size, equipped with dual piston guide rails and dual twist protection, with a piston stroke of 100mm and a maximum thrust of 8MN at 630bar

— 6A hydraulic system with independent control can drive each working piston to apply different pressures for studying sample deformation and dislocations under high pressure

— Each hydraulic system is equipped with a dual pressurization system of hydraulic pump and servo motor. The piston moves quickly in the low-pressure range and is precisely controlled in the high-pressure range, with a maximum pressure error of+/-0.5bar

— Can generate very steep or very smooth pressure curves with minimal pressure fluctuations, meeting demanding experimental requirements

— The hydraulic system pressure is monitored by high-precision digital pressure sensors

— No need for Walker/Kawai (8-sided) or DIA/D-DIA (6-sided) equal pressure devices, 6 top hammers directly act on the sample

— All working pistons are equipped with high-precision displacement sensors, with precision in the micrometer range

— Can be paired with hammer heads of different sizes

— A two-stage hammer can be used for secondary pressurization

— Fully automatic pressure control, users can freely set any pressure curve. The control system can set up 20 segmented control programs.

— Provide remote control software to monitor and control experiments on a personal computer

— Pressure can last for days or even weeks

— The equipment skeleton is composed of 4x4 42CrMo4 alloy plates, which are sturdy and reliable

— Complete safety protection, equipped with safety protection doors and safety alarms

— Low noise, high stability, low maintenance cost, suitable for laboratory use

The total weight of the equipment is about 50 tons