Smoke online monitoring system

NegotiableUpdate on 12/25

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The online smoke monitoring system Gasboard-9050GHG, combined with multiple detection technologies such as infrared, electrochemical, ultrasonic, and ceramic zirconia, has strong resistance to gas cross interference. The system consists of four parts: a carbon emission continuous online monitoring system detection unit (CO2, CO, CH4, N2O), a flue gas parameter monitoring unit (temperature, pressure, flow rate, O2, humidity), a data acquisition unit, and a processing unit. It is equipped with a high-temperature condensation extraction sampling device, and the probe and sampling pipeline are heat traced throughout the process. It can continuously monitor multiple indicators in flue gas online and dynamically.

Product Details

Product Name:Smoke online monitoring system

Product model: Gasboard-9050GHG

Product Overview

Smoke online monitoring systemGasboard-9050GHG, combined with multiple detection technologies such as infrared, electrochemical, ultrasonic, and ceramic zirconia, has strong resistance to gas cross interference. The system consists of four parts: a carbon emission continuous online monitoring system detection unit (CO2, CO, CH4, N2O), a flue gas parameter monitoring unit (temperature, pressure, flow rate, O2, humidity), a data acquisition unit, and a processing unit. It is equipped with a high-temperature condensation extraction sampling device, and the probe and sampling pipeline are heat traced throughout the process. It can continuously monitor multiple indicators in the flue gas online, and is suitable for monitoring the working conditions of various large-scale industrial fixed pollution source exhaust emissions.

Product Features

Obtained China Environmental Protection Product Certification (CCEP)

Easy maintenance: The probe uses a metal sintered filter to filter the sampling flue gas, with good filtering effect, high blowback efficiency, and long probe maintenance cycle
High measurement accuracy: Gas analysis uses proprietary non dispersive infrared (NDIR) gas sensor technology, which can accurately measure changes in CO2 gas concentration with an accuracy of up to 1% F.S
Long service life: All probes and sampling system components are made of corrosion-resistant materials and have automatic blowback function
Support remote monitoring and diagnosis: data can be transmitted to the higher-level centralized control system through multiple interfaces, providing real-time basis for remote monitoring and on-site process adjustment

Technical Specifications

Measure components	CH4、CO2、CO、N2O、O2
Measuring principle	CH4/CO2/CO/N2O: NDIR
Measuring principle	O2: ECD
measurement range	CH4/CO/N2O: 0~1000ppm
measurement range	CO2/O2: 0~25%
precision	CH4/CO2/CO/N2O: ≤±1%F.S.
precision	O2: ≤±2%F.S.
resolution	CH4/CO/N2O:1ppm
resolution	CO2/O2: 0.01%
response time	T90＜25s
repetitiveness	≤±1%
Smoke temperature limit	0~300°C
System compressed air requirements	0.4~0.8MPa， No dust, no oil, no water
air consumption	The maximum gas consumption is 2.2m3/h; Average gas consumption 0.45m3/h
airflow rate	The maximum atmospheric flow rate is 2L/min; Average airflow rate of 1.5L/min
Heat tracing temperature (pipeline/probe)	120~180°C
Protection level	IP54
Appearance dimensions (L * W * H)	800mm760mm1800mm
ambient temperature	-20~50°C
ambient humidity	<95% RH (non condensing)
Electrical parameters
communication interface	RS-485，RS-232 , 4~20mA，Ethernet
power supply	220V AC±10%，>3000W
Function Configuration
Equipped with self diagnostic function, it can check the status of sensors online
Built in zeroing air pump, capable of achieving automatic air zeroing