Special shaped bottle positioning and labeling machine

Product Name: Irregular Bottle Positioning Labeling Machine Introduction: This double cone bottle irregular labeling machine is a characteristic product of Xunjie Machinery

Product Name: Irregular Bottle Positioning Labeling Machine

Introduction and overview of special-shaped bottle positioning and labeling machine:

This double cone bottle irregular labeling machine is a featured product of Xunjie Machinery, mainly used for simultaneous positioning and labeling of body and neck labels of round double cone bottles and cylindrical bottles. It is mainly suitable for automatic labeling of round double cone and cylindrical packaging containers in industries such as food sauce This machine has strong expandability! Various printers can be optionally selected to complete online real-time printing, which can be used as a standalone machine or connected to a production line for use

Scope of application:
◆ Applicable labels: The fully automatic double cone bottle labeling machine can be used for labels such as self-adhesive labels, self-adhesive films, electronic supervision codes, barcodes, etc.
◆ Applicable products: plastic conical, double conical, circular bottles and cans; Glass conical, double conical, and circular bottles and jars; Paper round cans; Metal conical, double conical, and circular bottles and jars.
◆ Application industry: The fully automatic double cone bottle labeling machine can be widely used in industries such as pharmaceuticals, daily chemical, chemical, cosmetics, electronics, hardware, plastics, etc.
◆ Application examples: Dew bottle, tomato sauce bottle, chicken juice bottle, sesame oil bottle, perfume bottle, biconical bottle, etc.

Product parameters:

Label width (large): 130mm
Label length: 10-300mm
Belt width: 101.6mm
Bottle diameter (large): Φ 110mm
Outer diameter of paper roll (large): φ 350mm
Inner diameter of paper roll: 76mm
Labeling speed (high): 21m/min or 50m/min
Labeling accuracy: ± 1mm
Machine dimensions (length * width * height): 2200 mm * 1200 mm * 1400 mm

Detail display:

Product features:

1. Using stepper or servo motors
2. Clutch design ensures more stable tension on the label, making it easier to improve labeling accuracy
3. Advanced color human-machine interface control system
4. Siemens PLC control, high reliability
5. Use German and Japanese electronic sensors
6. The machine has a simple and compact structure, making it easy to operate and maintain
7. Can be equipped with a ribbon coding machine or a heat transfer machine (optional)
8. The top belt device makes the bottle body smoother during the labeling process, avoiding the occurrence of label misalignment and bottle tipping.

Equipment performance characteristics:
1. The conical bottle positioning labeling machine adopts advanced technology, microcomputer PLC electronic fiber optic sensor control system, which ensures stable and high-speed operation of the whole machine
2. The operating system adopts an interface control, which is easy to operate, practical, efficient, and has a production counting function
3. The advanced technology of conical bottle positioning labeling machine is fast and stable
4. With a wide range of applications, the conical bottle positioning labeling machine can be used for labeling circular bottles of various sizes
5. Adhesive rolling bottle body, making the label more firmly attached
6. The front and rear sections of the conical bottle positioning labeling machine can be optionally connected for use

Customer Case:

Precautions for adjusting the labeling machine:

Sometimes the distance between the paper blocking claw and the paper conveyor belt is too small, the glue is too dry, and the outer cutting edges of the two label removal claws are not parallel, which can cause the label to get stuck on the label removal claws. In this way, adding a little water and stirring can dilute the glue or replace the label removal claws.
Sometimes the bottle and label do not match at the attachment point, and there is too much glue, which can cause the label to be unable to stick to the bottle and often on the sponge board or paper conveyor belt. This can be adjusted by adjusting the glue flow rate or adjusting the label release claw to make it work properly.
3. Sometimes the adhesive surface on the label is too smooth, the hardness of the label is too strong, and the left and right claws, upper and lower claws of the label are not aligned with the grooves of the positive rotation rod. The viscosity of the adhesive is not enough, which can cause the label to be unable to be stuck halfway by the fan-shaped rotation rod. The solution is to use adhesive with higher viscosity instead; Replace the label material and ensure that the adhesive surface is rough; Replace the paper with a thinner and softer texture, or wrap the label with a damp towel for about five minutes before use to soften the label; Device for adjusting labels.
4. There should be no gap between the rubber scraper and the rubber roller throughout the entire length. If there is a gap, the rubber scraper can be adjusted by adjusting the eccentric bolt.
5. Adjust the rubber roller and the label plate. The label plate and the rubber roller only contact each other without any pressure. The gap is too large, and there is too much glue on the label board, causing glue to be thrown. The gap is too small and the contact is too tight, which will squeeze out the glue and leave half of the label without glue. Practice has proven that a gap between the standard plate and the rubber roller of 0.1mm to 0.2mm is optimal. This can be achieved by adjusting the bearing seat at the bottom of the rubber roller, and if necessary, adjusting the bearing at the top of the rubber roller.
6. When there is no label, the label pressure plate can be pressed to the front end of the label box, and when the label is installed, the label near the hook finger cannot be crushed.
7. When there is no label, the label pressure plate can be pressed to the front end of the label box, and when the label is installed, the label near the hook finger cannot be crushed.
8. Based on the bottle inlet star wheel, when the bottle is located in the middle of the bottle inlet star wheel groove, adjust the screw rod so that the screw rod is close to the bottle on the bottle inlet side without displacement