Sponge Long term Compression Deformation Tester

NegotiableUpdate on 03/23

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Brief introduction: Product name: Sponge Long term Compression Deformation Tester Sponge Long term Compression Deformation Tester Sponge Static Compression Test. Take a standard test piece, clamp it between the flat plates of the device, rotate it with screws, compress it to a certain ratio, and then place it in an oven at a certain temperature. After a specified time, take out the test piece, remove it, cool it for 30 minutes, measure its thickness, and substitute it into the formula to calculate its compression deflection compression deformation. The calculation formula is equal to the difference between the thickness before compression and the thickness after compression divided by the difference between the thickness before compression and the thickness of the spacer plate, multiplied by * * * * According to standards: GB/T6669-2008 CNS-356010487, JIS-K6301, ASTM-D395

Product Details

Sponge Long term Compression Deformation Tester Long term compression deformation tester

Product Name:Sponge Long term Compression Deformation Tester

Product Model:JX-8019

Product Description:

Take standard test pieces, clamp them between the flat plates of the device, rotate them with screws, compress them to a certain ratio, and then place them in an oven at a certain temperature. After a specified time, remove the test pieces and cool them30Measure its thickness in minutes, substitute it into the formula to calculate its compression skewness and compression deformation. The calculation formula is equal to the difference between the thickness before compression and the thickness after compression divided by the difference between the thickness before compression and the thickness of the spacer plate, and then multiplied by****

Sponge Long term Compression Deformation Tester According to the standard:GB/T6669-2008 CNS-3560,10487,JIS-K6301,ASTM-D395

Specifications:

Test piece: Rubber ￠28.68mm，12.7(D)Foam plastic:50×50×25mm

Volume:20×12×10cm

Weight:11kg

Sponge Long term Compression Deformation Tester Sponge Long term Compression Deformation Tester Sponge Long term Compression Deformation Tester Sponge Long term Compression Deformation Tester Sponge