Stainless steel pressure resistant metal hoses are made of 304 stainless steel or 301 stainless steel and are used for automation instruments ..

Stainless steel pressure resistant metal hose material is 304 stainless steel or 301 stainless steel, used as a protective tube for automation instrument signals and wire and cable protection tubes for instruments, with specifications ranging from 3mm to 150mm

Stainless steel pressure resistant metal hoses are made of 304 stainless steel or 301 stainless steel, and are used as protective tubes for automation instrument signals and wire and cable protection tubes for instruments, with specifications ranging from 3mm to 150mm. Ultra small diameter stainless steel hoses (4mm-12mm) provide solutions for the protection of precision electronic equipment and sensor circuits, and are used for the protection of sensor circuits in precision optical rulers and industrial sensors. Has good flexibility, corrosion resistance, high temperature resistance, wear resistance, and tensile strength.

The structure of stainless steel pressure resistant metal hose: It is a flexible component used for conveying various media, consisting of one or more layers of steel wire or steel strip mesh wrapped around a stainless steel corrugated pipe, with joints or flange heads at both ends. The characteristics of stainless steel pressure resistant metal hoses are corrosion resistance, high temperature resistance, low temperature resistance (-196 ℃~+420 ℃), light weight, small size, and good flexibility. Widely used in industries such as aviation, aerospace, petroleum, chemical, metallurgical, power, papermaking, wood, textile, construction, medicine, food, tobacco, transportation, etc.

Precautions for installation and use of stainless steel pressure resistant metal hoses:

1. The corrugated pipe of the stainless steel hose is made of chromium nickel austenitic stainless steel. When using, pay attention to preventing point corrosion by nitrogen ions and corrosive damage by dilute sulfuric acid.

2. After conducting a hydrostatic test on equipment and piping systems equipped with stainless steel hoses, users should prevent the impact of rust blocks and the deposition of chloride ions and sediment, which can cause corrosion and mechanical damage.

3. During installation, the metal hose should be protected from splashing and mechanical damage during welding, otherwise it may cause leakage.

4. Sealed piping systems should strictly comply with safety operating procedures to prevent hose detachment or bursting caused by overpressure due to improper operation or other factors.

5. Please carefully digest the installation method examples of stainless steel hoses and strictly follow the correct schematic diagram for installation and use.