Stainless steel split type electromagnetic flowmeter

Stainless steel split type electromagnetic flowmeterThe manufacturer of the production quotation for this flowmeter product model belongs toElectromagnetic FlowmeterFor more direct sales price quotations of stainless steel, split type, electromagnetic, and flow control instruments, please feel free to inquire by phone. Below is the product information details of stainless steel split type electromagnetic flow meters.

Stainless steel refers to steel that is resistant to weak corrosive media such as air, water, and chemical corrosive media such as acid, alkali, and salt, also known as stainless acid resistant steel. In practical applications, steel that is resistant to weakly corrosive media is often referred to as stainless steel. The corrosion resistance of stainless steel depends on the alloy elements contained in the steel.

Stainless steel split electromagnetic flowmeterThe measurement accuracy is not affected by changes in fluid density, viscosity, temperature, pressure, and conductivity. The sensor's induced voltage signal is linearly related to the average flow rate, resulting in high measurement accuracy. Stainless steel flow meters measure the absence of flow barriers in pipelines, therefore there is no additional pressure loss; There are no movable parts inside the measuring pipeline, so the sensor has an extremely long lifespan. Stainless steel electromagnetic flowmeter requires a shorter straight pipe section, with a length of 5 times the diameter of the pipeline, as the induced voltage signal is formed in the entire space filled with magnetic field and is the average value on the pipeline surface. The sensor part of the stainless steel electromagnetic flowmeter only has the inner lining and electrode in contact with the measured material. As long as the electrode and inner lining materials are selected reasonably, they can be corrosion-resistant and wear-resistant.

Split type electromagnetic flowmeter is mainly used to measure the volumetric flow rate of conductive liquids and slurries in closed pipelines. Including highly corrosive liquids such as acids, alkalis, salts, etc. This product is widely used in industries such as petroleum, chemical, metallurgical, textile, food, pharmaceutical, papermaking, as well as in fields such as environmental protection, municipal management, and water conservancy construction.

Stainless steel split electromagnetic flowmeterClassified by the assembly method of converters and sensors, there are split type and integrated type.

Stainless steel split electromagnetic flowmeterIt is the most commonly used form of electromagnetic flowmeter, as shown in the figure below. The sensor is connected to the pipeline, and the converter is installed near the sensor in the instrument room or easily accessible to people, with a distance of tens to hundreds of meters.

To prevent external noise from entering, signal cables usually use dual core shielded wires. When measuring liquids with low conductivity and gathering for more than 30m, in order to prevent signal attenuation caused by partial capacitance of the cable, it is also required to connect a shielding driver with the same potential and low impedance source as the core wire to the inner shielding. The converter of the split type electromagnetic flowmeter can be kept away from harsh on-site environments, making electronic component inspection, adjustment, and parameter setting more convenient.

Stainless steel split electromagnetic composition

The measurement principle of split type electromagnetic flowmeter is based on Faraday's law of electromagnetic induction. The split type electromagnetic flowmeter consists of a sensor and a converter. The sensor is installed on the measurement pipeline, and the converter is installed within 30 meters or 100 meters from the sensor. The two are connected by a shielded cable.

The main components of the split type electromagnetic flowmeter sensor are: measuring tube, electrode, excitation coil, iron core, and magnetic yoke housing. Mainly used to measure the volumetric flow rate of conductive liquids and slurries in closed pipelines. Such as water, pulp, various acids, alkalis, salt solutions, food slurries, etc., are widely used in industries such as petroleum, chemical, metallurgical, textile, food, pharmaceutical, papermaking, as well as environmental protection, municipal management, water conservancy construction, etc. to measure high temperature and high humidity environments that are difficult to observe.

Characteristics of stainless steel split electromagnetic flowmeter products

1. Measurement is not affected by changes in fluid density, viscosity, temperature, pressure, and conductivity;

2. There are no obstructing flow components or pressure loss inside the measuring tube, and the requirements for straight pipe sections are relatively low;

3. Series nominal diameter DN15~DN3000. There are multiple options for sensor lining and electrode materials;

4. The converter adopts a novel excitation method, with low power consumption, stable zero point, and high accuracy. The flow range can reach 1500:1;

5. The converter can be integrated or separated from the sensor;

6. The converter adopts a 16 bit high-performance microprocessor, 2x16 LCD display, convenient parameter setting, and reliable programming;

7. The flowmeter is a bidirectional measurement system equipped with three integrators: forward total, reverse total, and differential total; Can display. Zhuang, reverse flow, and have multiple outputs: electric

Flow, pulse, digital communication HART；

8. The converter adopts surface mount technology (SMT) and has self checking and self diagnostic functions

Reference flow range of stainless steel split electromagnetic flowmeter

Split type electromagnetic flowmeterThe measurement principle is based on Faraday's law of electromagnetic induction. The split type electromagnetic flowmeter consists of a sensor and a converter. The sensor is installed on the measurement pipeline, and the converter is installed within 30 meters or 100 meters of the sensor, connected by a shielded cable. The main components of the split type electromagnetic flowmeter sensor are: measuring tube, electrode, excitation coil, iron core, and magnetic yoke housing. Mainly used to measure the volumetric flow rate of conductive liquids and slurries in closed pipelines.

The above is the complete content of the stainless steel flow meter split type flow meter electromagnetic flow meter product. Welcome to inquire about the selection and quotation of the stainless steel flow meter split type flow meter electromagnetic flow meter by phone.

This article address: Please do not delete when reposting! Stainless steel split electromagnetic flowmeter