Steel ball impact testing machine

NegotiableUpdate on 01/18

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Number of workstations: 1. Testing height: 0-1500mm. Can be set (to prevent secondary impact function from working). Height accuracy: ± 1mm. XY axis stroke: X=200mm

Product Details

Number of workstations:	1 workstation	Test height:	0-1500mm adjustable (prevents secondary impact function from working)
High precision:	±1mm	XY axis travel:	X=200mm, Y=100mm (manual)
Ball drop positioning accuracy:	±0.1ｍｍ	Steel ball specification:	32.65g， Steel ball with a diameter of 20mm
Maximum specification of test sample:	20 inch PAD	Lifting method:	Motor driven lifting
Alignment method:	Laser light crosshair cursor	Automatic drop function:	auto-snapping
Receiving method:	Pneumatic clamp	Control method:	Touch screen+PLC
Gas source requirements:	Clean compressed air with a pressure not less than 0.6MPa	Power requirements:	AC220Ｖ ±10％　　50HZ
Key points of test fixture design:	1) The bottom of the fixture is flat and does not come with any pads
	2) The LCD compartment is located in the middle position of the fixture
	3) TP warehouse chamfer angle follows CG shape with four outer rounded corners, avoiding 0.15-0.2mm
	4) The width and length directions of the TP warehouse are both 0.1-0.15mm wider than the single-sided expansion of the CG shape
	5) The gap value from the module backlight to the bottom of the fixture should be ≥ 10mm
	6) The content of the fixture label should indicate:	Manufacturer, project code, fixture name, date, etc
	7) Dimensional annotation on fixture drawings:	Total length and width of the fixture, length of TP compartment (tolerance 0.1mm), TP width (tolerance 0.1mm), length of LCD compartment (tolerance 0.1mm), LCD compartment width (tolerance 0.1mm)

The steel ball impact testing machine is mainly designed for impact testing of products, using a touch screen, infrared alignment device, and a certain weight of steel ball to strike the product.

The steel ball impact testing machine is composed of a 7-inch color touch screen, servo motor, PLC software program, imported linear bearings, imported ball screws, pneumatic components and other accessories. It is a professional testing equipment designed for product drop ball impact testing.
Compliant with standards: The product complies with GB15763.3-2009