Step in constant temperature and humidity test room for the whole vehicle

Step in constant temperature and humidity test room for the whole vehicleCapable of simulating various temperature conditions to measure the performance of automobiles in different temperature environments. In high temperature testing, the laboratory can simulate the high temperature environment in summer to test the heat dissipation performance, air conditioning cooling effect, and engine heat load bearing capacity of the car under high temperature conditions. At the same time, low-temperature testing can simulate the harsh winter environment, evaluate the starting performance of the car at low temperatures, the working status of the lubrication system, and the frost resistance of the body materials.

Testing the performance of cars in different humidity environments: By precisely controlling the temperature and humidity in the test chamber, it is possible to simulate climate conditions in different regions and seasons, test the electrical performance, sealing performance, and corrosion resistance of car body materials in different humidity environments. This type of testing helps car manufacturers understand the performance of their vehicles under different climate conditions, enabling targeted improvements and optimizations.

Improving product performance: These tests provide valuable data support for car manufacturers, helping them optimize vehicle design and enhance product performance.

Technical specifications and parameters:

Refrigeration system: using French Taikang fully enclosed refrigeration compressor unit (or American Gulun compressor)

Refrigeration compressor: In order to ensure the cooling rate and achieve extremely low temperature requirements of the test chamber, the test chamber adopts a stacked refrigeration method

The design of refrigeration systems should incorporate energy regulation technology, which is an effective way to ensure that the energy consumption and cooling capacity of the refrigeration system can be effectively adjusted while the refrigeration unit is operating normally, reducing the operating costs and failure rates of the refrigeration system to a more economical state.

Refrigeration auxiliary components: air-cooled coil condenser, finned multi-stage evaporator. The main refrigeration accessories and control components are imported, such as the American "Aigo" drying filter, the Italian "Castello" solenoid valve, etc;

Refrigerant: R404A is used

Cooling method: air cooling

Installation method: Split outdoor

Heater: finned heat dissipation tube type nickel chromium alloy electric heating method

Humidification system: External humidifier, water addition can be done automatically or manually

Temperature and humidity control system:

Controller: 7-inch true color large screen LCD digital display programmable touch screen controller.

Controller specifications:

Accuracy: Temperature ± 0.1 ℃+1 digit

Resolution: Temperature ± 0.01

Temperature slope: adjustable from 0.1 to 9.9

Equipped with upper and lower limit standby and alarm functions

Temperature input force signal PT100

Screen display function:

Direct display of temperature setting (SV) and actual (PV) values

Can display the current program execution number, segment number, remaining time, and number of cycles

Accumulated operation time function

Has a separate program editing screen.

The screen display protection function can be set to timer, TIMER, or manually turned off

Program capacity and control functions:

Available program groups: A total of 120 PATTEN

Available memory capacity: 1200 SEGMENT in total

Repeatable command execution

SEGMENT time setting: 0-99Hour59Min

Equipped with power-off program memory, it automatically starts and continues to execute program functions after power restoration

Equipped with RS-232 communication interface and dedicated testing software (optional accessories)

Real time display of graphical curves during program execution

It has the function of scheduled startup and shutdown

Has date and time adjustment function

Step in constant temperature and humidity test room for the whole vehicleRoom structure:

The chamber adopts a combined storage plate structure, which can be easily assembled on the buyer's site

The indoor wall material of the laboratory is SUS304 stainless steel plate, and the outer wall material is high-quality cold-rolled steel plate. The outer surface is electrostatically painted with a light gray white color; 100mm polyurethane foam and high-density aluminum silicate insulation layer in the middle

The workshop floor is made of anti slip patterned steel plate, and the anti slip slope should ensure that the trolley can easily enter and exit the workshop

The laboratory adopts a double door structure, equipped with internal and external handles

Install moisture-proof lighting on the top of the workspace, with one cable lead out hole on each side (which can be sealed when not in use)

The structure of the laboratory should be designed reasonably, manufactured with excellent technology, aesthetically pleasing both inside and outside surfaces, and the stainless steel plates and electrostatic spraying surfaces should be smooth and free of defects such as bumps and scratches.

Studio size: customized according to requirements, with volumes ranging from 1m ³ to 100 cubic meters

The walk-in constant temperature and humidity laboratory is designed to meet users' requirements for large volume testing spaces. It can be divided into integral welding and assembly types structurally. Among them, there are over thirty sizes and sixteen types of refrigeration units that can be matched with each other in the assembled type alone.

Installation and debugging:

(1) Home delivery, complete system installation with quality and quantity as required by the contract, and our engineering and technical personnel conduct debugging.

(2) The product manual provides installation and interface information, which greatly facilitates equipment maintenance.

(3) Provide training for equipment users to enable them to operate the equipment independently in the future. Master the operation, daily maintenance, and simple repairs of the product.

Warranty Commitment:

From the date of acceptance, a two-year warranty will be provided (except for damages caused by natural disasters, abnormal electricity, improper use, or improper maintenance, our company will provide free repairs).

For services beyond the warranty period, only corresponding cost fees will be charged.

Any problems that occur during the use of the equipment should be responded to within 24 hours, and maintenance engineers and technicians should be promptly dispatched to handle and solve the problems.

Promise to provide lifelong free technical support.