T1 level 50KA3P+N surge protector [beam lightning protection]

NegotiableUpdate on 04/06

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Main application: switch type high-energy SPD. Mainly used for lightning protection in power supply systems below 380V. Can be used as surge protectors for control cabinets, incoming cabinets, and distribution boxes. Product features: Modular design, lightning protection module suitable for different power grid standards, easy to replace, beautiful appearance. Customization: Accepting OEM and can be customized according to customer requirements.

Product Details

High energy release, fast response time, large flow capacity, and low residual pressure.

Modular design, the lightning protection module is suitable for different power grid standards, easy to replace, and has a beautiful appearance.

Imported high-energy graphite, with stable performance and safe use. No leakage current, no continuation current.

5-year quality assurance and lifetime free technical support.

Optional communication alarm interface, with an external RS485 communication interface.

Product Features

Product · Parameters

Source manufacturer of beam lightning surge protector

model	Impulse current (KA) (10/350 μ s)	Nominal discharge current (KA) (8/20 μ s)	Working voltage (V)	Maximum continuous operating voltage Uc (V)	response time	Protection level Up (KV)
GS-I/15/60	15	60	385	400	≤100	2.0
GS-I/25/80	25	80	385	400	≤100	2.2
GS-I/35/100	35	100	385	400	≤100	2.5
GS-I/50/150	50	150	385	400	≤100	3.0

installation
1. A multi stranded copper wire with a power connection wire of not less than 6mm2, and a multi stranded copper wire with a grounding connection wire of not less than 10mm2. The connecting wire should be as short, straight, and thick as possible.
2. The front end of the lightning arrester should be connected in series with suitable backup protectors, fuses, or air switches.
Installation precautions
1. During installation, the power must be disconnected and live operation is strictly prohibited. The connecting wires must meet the requirements.
2. After installation, insert the lightning protection module into place and check if it works properly.
3. The lightning arrester does not require special maintenance, it only needs to be regularly checked for loose connections and normal status indicators.