T2 level 60KA surge protector [beam lightning protection]

NegotiableUpdate on 04/06

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Main purpose: Mainly used to protect electrical equipment from stable and safe operation in thunderstorm weather. Product features: Equipped with temperature control protection circuit, built-in and protected, stable and reliable operation. Customization: Accepting OEM and can be customized according to customer requirements.

Product Details

High discharge current (20-200KA). Star shaped structure, suitable for various wiring methods.

Adopting temperature control protection circuit, built-in and protected, stable and reliable operation.

Built in automatic circuit breaker for overheating and instantaneous overcurrent.

Failure automatic monitoring indication and standard module installation.

5-year quality assurance and lifetime free technical support.

Optional communication alarm interface, with an external RS485 communication interface.

Product Features

Product · Parameters

Source manufacturer of beam lightning surge protector

model	最大通流容量（KA）	Nominal discharge current (KA) (8/20 μ s)	Maximum continuous operating voltage Uc (V)	Response time (ns) ≤	Protection level Up (KV) ≤	segment mode
GS-II-20	20	10	220-1500V (AC/DC selected based on system voltage)	≤25	≤2.0-3.0	3P/3P+N
GS-II-40	40	20		≤25
GS-II-60	60	30		≤25
GS-II-65	65	35		≤25
GS-II-80	80	40		≤25
GS-II-100	100	60		≤25
GS-II-120	120	70		≤25

Installation method
1. A multi stranded copper wire with a power connection wire of not less than 6mm2, and a multi stranded copper wire with a grounding connection wire of not less than 10mm2. The connecting wire should be as short, straight, and thick as possible.
2. The front end of the lightning arrester should be connected in series with suitable backup protectors, fuses, or air switches.
Installation precautions
1. During installation, the power must be disconnected and live operation is strictly prohibited. The connecting wires must meet the requirements.
2. After installation, insert the lightning protection module into place and check if it works properly.
3. When the module fault display window of the lightning arrester indicates red (the remote signaling terminal outputs an alarm signal), it indicates that the lightning arrester has malfunctioned and should be replaced in a timely manner.
4. The lightning arrester does not require special maintenance, it only needs to be regularly checked for loose connections and normal status indicators.