The IPX7 waterproof equipment adopts a box structure with no site restrictions and is made of 304 # stainless steel material

ipx7waterproof equipment

lBackground

The damage of natural water (rainwater, seawater, river water, etc.) to products and materials causes incalculable economic losses every year. The damage caused mainly includes corrosion, fading, deformation, decreased strength, expansion, mold, etc., especially electrical products that are prone to fire due to short circuits caused by rainwater. Therefore, conducting a shell protection water test for specific products or materials is a key procedure.

lProduct Introduction

IPX7 waterproof deviceUsed to test the IPX7 waterproof rating of products, the test samples include electronic components, outdoor lighting fixtures, mobile phone cases, automotive accessories, etc. It adopts a box structure, no site restrictions, 304 # stainless steel material, rust proof and sturdy.

lProduct images

lExecution standards

conform toIEC60529:1989+A1:1999 +A2：2013《Degrees of protection provided by enclosures(IP Code)》The 《GB4208-2017degrees of protection provided by enclosure(IPcode)》14.2.7Terms and conditionsGB7000.1Lighting fixtures Part: General Requirements and Tests9.2.8Requirements of the terms.

lProduct characteristics

1. Suitable for conducting IPX7 waterproof rating testing on products.

2. This box allowsWater depth 18riceBottom area:1000*1000mm。（customizable）

3. Immersion tankDouble layer structure：

a、The inner layer is formed by integral sub arc welding of SUS304 # stainless steel plate, ensuring long-term use without rust or water leakage;

b、Strengthen the inner box with 40 square steel bars in the middle of the two layers to prevent deformation;

c、The outer layer is made of hairline stainless steel plate welded together, with mirror stainless steel plate edging. There are no welding points on the surface, and the overall appearance is beautiful and generous.

4. Installation of water inlet and outlet pipelines under the water tankThe inlet valve is located above the back.

5. Observation window consists of 1Made by bonding 5mm tempered glass, the test results of the sample can be clearly observed.

6. The stainless steel chassis is equipped with load-bearing wheels and foot cups, making it easy to move and fix.

7. The stainless steel ruler displays the water level.

8. Installation above the chassisElectric lifting device(Capable of carrying 300KG), place a large number of test samples. 9. The stainless steel sample basket is made of stainless steel square tubes, and the surrounding and bottom are processed with stainless steel grids.

lProduct Details

lEquipment parameters