The large tie rod transverse compensator consists of two corrugated pipes connected by a middle pipe, a tie rod, an end plate, and a ball ..

Large pull rod transverse corrugated compensator (DLB): composed of two corrugated pipes connected by a middle pipe, as well as structural components such as pull rods, end plates, spherical and conical washers, mainly absorbing transverse displacement, and can also be used to compensate for axial, transverse, angular, and any direction of displacement synthesized from these three forms

Large pull rod transverse corrugated compensator (DLB):

Composed of two corrugated pipes connected by a middle pipe, as well as structural components such as tension rods, end plates, and spherical and conical washers, it mainly absorbs lateral displacement and can also be used to compensate for axial, lateral, angular, and any direction of displacement synthesized from these three forms. It is recommended to install a compound pull rod type expansion joint in the middle short pipe arm of a 90 ° Z-shaped pipeline to compensate for the axial displacement of the long pipeline at both ends. The large pull rod transverse corrugated compensator can compensate for the lateral displacement and small angular displacement of bent pipe sections, and is usually not used to compensate for angular displacement. The compensator consists of a connecting pipe, two corrugated pipes, and a large pull rod. It can absorb lateral displacement in any plane of the piping system. The displacement spherical nut rotates around the spherical washer, while the pull rod also has the ability to withstand internal pressure thrust.

Purpose:

The large pull rod transverse corrugated compensator can compensate for the lateral and angular displacement of curved pipelines

model:

Our company produces DN100-DN5000 with pressure levels ranging from 0.1Mpa to 2.5Mpa

Connection method: 1. Flange connection 2. Pipe connection

Product horizontal compensation amount: according to user requirements