-
E-mail
2791360449@qq.com
- Phone
- Address
Product Categories
Shandong Shengxin Liquid Filling Machine Manufacturer
Tianjin semi-automatic liquid filling machine
NegotiableUpdate on 01/02
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
1、 Principle and Characteristics A: The semi-automatic liquid filling machine is a semi-automatic piston filling machine
Product Details
1、 Principles and Characteristics
A、Semi automatic liquid filling machineIt is a semi-automatic piston filling machine. By driving a piston with a cylinder to extract and extract materials, a one-way valve is used to control the flow of materials, and a magnetic spring switch is used to control the stroke of the cylinder, the filling volume can be adjusted.
B、 The filling machine is designed reasonably, compact in size, and easy to operate.
C、 The material contact parts are made of 316L stainless steel material.
D、 The filling volume and filling speed can be adjusted freely, with high filling accuracy.
E、 The filling hood adopts anti drip and lifting filling device
2、 Main purpose
The semi-automatic liquid filling machine is mainly used for liquid filling of lotion, nursing liquid, oral liquid, disinfectant, eyewash, nutrient liquid, liquor, injection, pesticide, medicine, perfume, edible oil, lubricating oil and special industries.
3、 Malfunctions and Maintenance
1. After turning on, the crankshaft cannot rotate normally. Fault:
A: The upper fixing rod is biased downwards, and the inner and outer tubes of the syringe are firmly pressed when pushing the liquid, causing the crank to not rotate. The nut ① should be loosened, and the upper fixing rod should be moved up to the appropriate position before tightening the nut.
B: During the assembly of the syringe, the inner and outer tubes may get stuck due to uncleanliness, and the syringe needs to be removed for cleaning.
C: The injection system is not installed in the bearing area. Make it unable to function properly, it must be reinstalled.
2. The injection is uneven, the joint is not tightened properly, and there is air leakage. Further tightening is required.
3. The machine rotates normally, but no dispensing fluid is discharged. Fault:
A: There are foreign objects inside the valve that need to be cleaned;
B: The upper and lower pins inside the valve are placed incorrectly (both pins have their tips facing downwards and must not be installed backwards).
C: When there is liquid leakage from the outlet at the lower end of the piston in the 100 and 500ml models, the cylinder should be disassembled and replaced with a random sealing ring. Note: The sealing ring should use a φ 65 × 3.1 acid and alkali resistant sealing ring.
A、Semi automatic liquid filling machineIt is a semi-automatic piston filling machine. By driving a piston with a cylinder to extract and extract materials, a one-way valve is used to control the flow of materials, and a magnetic spring switch is used to control the stroke of the cylinder, the filling volume can be adjusted.
B、 The filling machine is designed reasonably, compact in size, and easy to operate.
C、 The material contact parts are made of 316L stainless steel material.
D、 The filling volume and filling speed can be adjusted freely, with high filling accuracy.
E、 The filling hood adopts anti drip and lifting filling device
The semi-automatic liquid filling machine is mainly used for liquid filling of lotion, nursing liquid, oral liquid, disinfectant, eyewash, nutrient liquid, liquor, injection, pesticide, medicine, perfume, edible oil, lubricating oil and special industries.
1. After turning on, the crankshaft cannot rotate normally. Fault:
A: The upper fixing rod is biased downwards, and the inner and outer tubes of the syringe are firmly pressed when pushing the liquid, causing the crank to not rotate. The nut ① should be loosened, and the upper fixing rod should be moved up to the appropriate position before tightening the nut.
B: During the assembly of the syringe, the inner and outer tubes may get stuck due to uncleanliness, and the syringe needs to be removed for cleaning.
C: The injection system is not installed in the bearing area. Make it unable to function properly, it must be reinstalled.
2. The injection is uneven, the joint is not tightened properly, and there is air leakage. Further tightening is required.
3. The machine rotates normally, but no dispensing fluid is discharged. Fault:
A: There are foreign objects inside the valve that need to be cleaned;
B: The upper and lower pins inside the valve are placed incorrectly (both pins have their tips facing downwards and must not be installed backwards).
C: When there is liquid leakage from the outlet at the lower end of the piston in the 100 and 500ml models, the cylinder should be disassembled and replaced with a random sealing ring. Note: The sealing ring should use a φ 65 × 3.1 acid and alkali resistant sealing ring.
(This content is provided by www.ytjlgzj. com)
