Touch screen lead-free dual peak soldering machine GSD-WD300T

Technical parameters of touch screen lead-free dual peak soldering machine GSD-WD300T

Control mode: touch screen+PLC

Transport motor: 1P AC220V, 60W

Transportation speed: 0-2000mm/min

Substrate size: 30-300mm (w)

Flux capacity: 6L

Preheating zone: 1300mm three-stage preheating, 600w * 10PCS room temperature~250 ℃

Tin furnace heating: 1.2KW * 9PCS room temperature~300 ℃

Tin furnace capacity: 210KG

Peak height: 0-12MM

Peak motor: 3P AC220V, 0.18KW * 2PCS

Claw washing pump: 1P AC220V 6W

Transportation direction: left → right

Welding angle: 3-6 º

Flux pressure: 3-5 BAR

Power supply: AC380V 50HZ

Normal operating power/total power: 3.5KW/18KW

Dimensions: 3400 (L) * 1200 (W) * 1650 (H)

Body size: 2700 (L) * 1200 (W) * 1650 (H)

Net weight: 850KG

Touch screen lead-free dual peak soldering machine GSD-WD300T features and advantages video introduction

Advantages of GSD-WD300T touch screen lead-free dual peak soldering machine

1. The preheating system uses far-infrared ceramic heating tubes for three-stage preheating, with an internal insulation layer for fast and uniform temperature rise, with a temperature of ≤± 2 ℃. A protective net is added, and the internal temperature of the preheating zone is 140 ℃, while the external temperature is less than 50 ℃, which is safe and energy-saving;

2. Full automatic transportation power system, variable frequency speed regulation, automatic synchronous board feeding, PCB board automatically entering the spray system;

3. The flux spray system adopts the scanning spray mode, which automatically adjusts the width according to the size of the PCB, so that the wetting range of the flux can reach a good effect. The Nissan nozzle and rod cylinder are controlled by PLC, accurate and reliable;

4. The flux recycling system adopts a maze type automatic recycling system Easy to clean and maintain;

5. The total power of the peak machine is 18KW, and starting requires 70min/5 kWh of electricity. 3 kWh of electricity per hour is required for no-load constant temperature control;

6. The overall design is safe and reasonable, with a sensitive fault alarm system to ensure stable equipment performance and the safety of operators;

7. Lead free and environmentally friendly design of the tin furnace, with convenient and safe lifting and access for easy cleaning;

8. The tin furnace is made of high-quality imported stainless steel and insulated with aluminum silicate insulation material. The temperature inside the furnace is 270 ℃, and the temperature outside the furnace is ≤ 60 ℃, with good insulation effect and high safety;

9. The tin furnace adopts a 5-sided heating method, which heats up quickly. It is designed with automatic on/off time, and the heating time of the tin furnace can be produced in 70 minutes;

10. The internal noise of the whole machine is 70 decibels, and the external noise is below 60 decibels Comply with international standards and environmental requirements;

11. The overall appearance of the machine has smooth lines, with a front door pneumatic structure and a rear door push-pull structure Open safely, conveniently, and labor-saving. The overall design is reasonable, efficient, energy-saving, safe, and environmentally friendly.;

12. The PCB board enters the soldering area of the tin furnace and automatically starts soldering. After soldering is completed, the wave crest stops automatically;

13. The peak welding machine tin furnace adopts imported high-temperature motors, variable frequency speed regulation, vertical control, and stable peak performance;

14. The heating of the tin furnace adopts high-speed PID external heating two-stage vertical control, which heats up quickly and solves the problem of tin explosion in the tin furnace.

Features of touch screen lead-free double wave soldering machine GSD-WD300T spray system

1. Lumina nozzle is adopted, and the spray range is 20~65mm. The height of the fan adjustable nozzle is 50~80mm, and the large flow rate is 60ml/min;

2. Imported filters, control valves, and pipe fittings are used to digitally display air pressure. All gas pipes of spray system are acid and alkali resistant and anti-corrosion SMC gas pipes;

3. The flux spray system adopts scanning spray mode, uses limit proximity switch and plate feeding optical eye for combined control, and automatically detects inductive spray when PCB comes to the board according to the speed and width of PCB. To achieve optimal wetting range of flux, imported nozzle and rod cylinder, dedicated drive control system, accurate and reliable;

4. Stainless steel bent into shape is used as a tray under the nozzle to hold wastewater and flux, which can be easily removed for cleaning;

5. The exhaust system is a maze style automatic recovery system and a double-layer stainless steel wire mesh filter, which utilizes fluid characteristics to filter and recover excess flux to the maximum extent possible;

6. It is equipped with adjustable direction and pneumatic air knife to blow the surplus flux during spray into the recycling box to prevent flux from entering the preheating area and ensure production safety;

7. All stainless steel+aluminum alloy bracket, easy to clean and maintain. High anti-corrosion and durable.

Touch screen lead-free dual peak soldering machine GSD-WD300T preheating system features

1. PID temperature control is precise and reliable, with imported thermocouple detection system and thermocouple abnormal alarm function;

2. The preheating system adopts a three-stage preheating control system with far-infrared ceramic heating tubes, which can provide a wide and sufficient preheating adjustment space, eliminate the phenomenon of poor soldering of large components on the PCB, and adapt to low solid residue and no wash rosin flux; 3-stage preheating and reheating automatic adjustment system, reducing multiple impacts on the PCB board and ensuring even heating;

3. Using Taiwan Exhibition heating element, it has fast heating, long lifespan, and low thermal inertia; Using far-infrared ceramic heating, the heat is evenly distributed to the bottom of the PCB, and the temperature in each temperature zone is uniform. The temperature in each temperature zone is complementary, and there is a deep groove phenomenon;

4. The preheating system adopts a modular design for easy maintenance and cleaning. It is filled with aluminum silicate insulation material, and the external surface temperature of the preheating zone is below 50 ℃ when the set temperature is 140 ℃, enhancing the insulation effect and reducing power consumption.

Touch screen lead-free dual peak soldering machine GSD-WD300T soldering system features

1. The PCB board enters the soldering area of the tin furnace and automatically starts soldering. After soldering is completed, the wave crest stops automatically;

2. Lead free and environmentally friendly design of the tin furnace, with convenient and safe lifting and access for easy cleaning;

3. The tin furnace is made of high-quality imported stainless steel and insulated with aluminum silicate insulation material. The temperature inside the furnace is 270 ℃, and the temperature outside the furnace is ≤ 60 ℃, with good insulation effect and high safety;

4. 3MM thick lead-free stainless steel material, resistant to high temperature and corrosion, suitable for lead-free processes, with a long lifespan; Standard configuration includes a furnace chamber;

5. The tin furnace adopts a 5-sided heating method, which heats up quickly. It is designed with automatic on/off time, and the heating time of the tin furnace can be produced in 70 minutes;

6. The tin furnace adopts imported high-temperature motors, variable frequency speed regulation, vertical control, and stable peak performance;

7. The heating of the tin furnace adopts high-speed PID external heating two-stage vertical control, which heats up quickly and solves the problem of tin explosion in the tin furnace;

8. The soldering nozzle can be adjusted according to the width of the PCB board you want to pass through, reducing the area of the effective soldering area and keeping the contact area between solder and air small, greatly reducing the amount of solder oxidation. There is a deviation in the impurity content of tin bars and tin slag. Suitable for various lead-free solder materials such as Sn/Ag/Cu, Sn/Zn, Sn/Cu, with a tin slag oxidation rate of 0.8-2.0KG per 8 hours (depending on the size of the PCB board);

9. Add diversion channels and anti oxidation sleeves to reduce black powder and tofu residue like oxides. The design of the tin furnace is reasonable, and the tin slag is automatically collected Cleaning the tin furnace is simple, convenient, and safe, without having to scoop up tin slag every day. It can be cleaned several times a week or longer depending on the situation.