Touch screen melt flow rate meter (touch screen with printing)

NegotiableUpdate on 09/21

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

This machine has mold opening and closing modes, which can close the mold cavity when the sample is preheated and then open the mold cavity when it needs to be used. This overcomes the disadvantage of ordinary melted grease that the sample flows when it is just heated and cannot be preheated

Product Details

This machine has mold opening and closing modes, which can close the mold cavity when the sample is preheated and open it again when it needs to be used. This overcomes the disadvantage of ordinary melted grease that the sample flows and cannot be preheated when it is just heated.

Temperature control range: room temperature~300 ℃

Measurement range: 0.1-300g/10min

Temperature fluctuation: ± 0.5 ℃

Temperature display resolution: 0.1 ℃

The inner diameter of the heating material cylinder is 9.55 ± 0.025mm, and the length is 162mm

Load: Full load

Inner diameter of mouth mold: φ 2.095 ± 0.005mm

The total length of the piston is 212mm, the effective length is 192mm, the diameter of the piston rod is 9mm, and the axis bending is not greater than 0.02/100. The length of the piston head is 6.35mm, and its diameter is 0.075 ± 0.015mm smaller than the uniform inner diameter of the barrel

Voltage: 220V ± 10% 50Hz

Mass: Approximately 34kg

：
1The control part of this machine adopts SiemensPLCTouch control, what you see and what you get, can display 'temperature'-The 'time' curve and the ability to print experimental data. The control method can be improved according to user needs to meet different user requirements.
2Users can set the experimental parameters by simply counting the touch screen with their hands. Simple and intuitive, easy to learn and understand. Control stability. Abandoning the cumbersome, complex, difficult to learn, and inconvenient operation of the original pure contactor relay control.
3The control method adopted by this machine is one with high usage ratePLCControl method. Replaced the original control method.