Trinity probe

TSM803Three parameter combination probe

review Three parameter combination probe, is a non bus structured universal combination probe used in our company's cooling tower fan safety monitoring system. It can be used with digital display meters or computer data acquisition and control systems(DCSThePLCwait)Connect and use.

This combination transmitter for monitoring the safe operation of wind turbine gearboxes integrates sensing, conversion, and transmission circuits for measuring oil temperature, oil level, and vibration signals inside, directly outputting the corresponding safety parameters4～20mAStandard current signal, can be paired with digital display meter or computer digital acquisition monitoring system.

◆ Temperature measurement characteristics:

Lubricating oil temperature measurement range:0～100 ℃

Comprehensive temperature measurement error:<1%

◆lubricating oilOil level measurement characteristics:

Measuring range:-10～+40㎜

（-10The position at mm is the oil limit position below the normal oil level of the gearbox

Measurement error:<1%.

Vibration measurement characteristics:

Measuring range:0～20 ㎜/sor0～50m/s2inside

Frequency band range:10～1000Hz，

Maximum error:<5%.

◆ Signal output characteristics:

Active current type output:DC/4～20mARequire passive resistive loads.
Maximum load resistance:< 500ohm

Power supply characteristics:

Working voltage:DC/24V±4V，
Rated current:DC/80mA,
Maximum instantaneous operating current:120mAEquipped with reverse polarity protection for power supply.

◆ Selection instructions:

JY630-A□□-B□□- C□□ –D□□