Two box temperature shock test chamber

NegotiableUpdate on 12/23

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The two box temperature shock test chamber is a testing equipment used in the metal, plastic, electronic and other material industries. Used for testing material structures or composite materials, it can withstand the degree of chemical changes or physical damage caused by thermal expansion and contraction of the sample in a short period of time in a continuous environment at high and extremely low temperatures.

Product Details

Two box temperature shock test chamber

Safety protection measures: power undervoltage, overvoltage, phase loss, phase sequence error protection; Three generation over temperature protection; Heater short circuit protection, refrigeration machine overpressure/overload/oil shortage protection; Humidifier malfunction protection; Overload/overheat protection for blower motor; Controller overcurrent protection and leakage protection; Cooling water shortage protection, etc. Outer box material: 1.5mm spray coated steel plate, gray white box body, SETH color door; Inner box material: 1.5mm thick SUS304 stainless steel plate, fully welded joints, no steam. Insulation material: double-layer insulation layer (polyurethane foam board+asbestos free mineral fiber) with a thickness of 125mm;

Two box temperature shock test chamber

Model (CM)		SET-A	SET-B	SET-C	SET-D	SET-G
internal dimensions		40×35×35	50×50×40	60×50×50	70×60×60	80×70×60
external dimensions		140×165×165	150×190×175	160×190×185	170×240×195	180×260×200
structure		Three box type (pre cooling box) (preheating box) (testing box)
Damper Device		Mandatory air device valve
Inner box material		SUS#304stainless steel
outer box material		Cold rolled steel plate electrostatic spraying
Freezing system		Mechanical compression binary cascade refrigeration method
Convert time		＜10Sec
Temperature recovery time		＜5min
Temperature Uniformity		＜2℃
temperature fluctuation		≤±0.5℃
temperature deviation		±2℃
cooling method		water cooling
dwell time		30 min
temperature range	preheating temperature	+60～200℃（40min）
	High temperature impact	+60～150℃
	Pre cooling temperature	+20℃～-80℃（70min）
	low temperature impact	-10℃～-40℃/-55℃/-65℃
	temperature sensor	JIS RTD PT100Ω× 3 (platinum sensor)
	controller	LCD touch screen PLC controller
	Control method	By relying on integral saturation PID, fuzzy algorithm balanced temperature control P.I.D+P.W.M+S.S.R
Standard Configuration		1 set of illuminated glass windows, 2 sample racks, and 1 test lead hole are attached
safety protection		Leakage, short circuit, overheating, water shortage, motor overheating, compressor overpressure, overload, overcurrent protection
power supply voltage		AC380V 50HzThree phase four wire+grounding wire

两箱式温度冲击试验箱