-
E-mail
hsupen@ms14.hinet.net
- Phone
-
Address
No. 351 Fuyang Road, Fengyuan District, Taichung City
Product Categories
Xuben International Precision Machinery Co., Ltd
Two/three axis indexing disc
NegotiableUpdate on 03/26
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
Two/three axis indexing disc
Product Details
Specification Table
| model | unit | SUA(H)-125-2W/3W | ||
|---|---|---|---|---|
| Disk diameter | mm | Ø125 | ||
| Diameter of the central hole on the disc surface | mm | Ø35H7 | ||
| Central hole penetration diameter | mm | Ø25 | ||
| Center height (for vertical use) | mm | 155 | ||
| Bottom to disk height (for horizontal use) | mm | 152 | ||
| Width of T-shaped groove on the surface | mm | 12H7 | ||
| Key width | mm | Ø18h7 | ||
| Minimum set angle | deg. | 0.001 | ||
| Segmentation accuracy | sec. | 40 | ||
| Repetitive accuracy | sec. | 4 | ||
| Locking torque | Air pressure 5~7kg/cm ² | N.m | 100 | |
| Oil pressure 20~30kg/cm ² | N.m | 150 | ||
| Servo motor model | FANUC | - | α2i / ß4is | |
| Mitsubishi | - | HF-75T | ||
| Gear ratio | - | 1 : 60 | ||
| Maximum disk speed (calculated based on FANUC α motor) | rpm | 83.3 | ||
| Allowable load capacity | vertical | kg | 50 | |
| horizontal type | kg | 110 | ||
| Use the tailstock | kg | 110 | ||
| Allowable cutting force (Locked state) |
F | N | 10000 | |
| FxL | N.m | 410 | ||
| FxL | N.m | 80 | ||
| Turbine allowable torque | N.m | 85 | ||
| Permissible consistency | J=W.D²/8 | kg.m² | 0.14 | |
*Our company reserves the right to change product specifications, dimensions, and design features without prior notice.
Appearance dimension diagram
