Ultra thin distributor (one in, one out)

NegotiableUpdate on 12/02

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The ultra-thin distributor (one in, one out) adopts a 16 bit integrated chip design, which collects the DC current or voltage output from various primary sensors or other instruments on site. After isolation, anti-interference suppression and other processing, it outputs DC current or voltage signals to the control system or other intelligent instruments. The $r $n intelligent signal isolator adopts input, output, and power three terminal isolation technology, electrical isolation, and disconnects the direct circuit (DC path) in the process loop, greatly enhancing the stability and anti-interference ability of the detection and control circuit signals, thereby improving the reliability of the entire system.

Product Details

Ultra thin distributor (one in, one out)

Product Overview
The ultra-thin distribution device (one in one out) adopts a 16 bit integrated chip design, which collects the DC current or voltage output from various primary sensors or other instruments on site. After isolation, anti-interference suppression and other processing, it outputs the DC current or voltage signal to the control system or other intelligent instruments.
The ultra-thin distribution device (one in, one out) adopts input, output, and power isolation technology, electrically isolating and disconnecting the direct circuit (DC path) in the process loop, greatly enhancing the stability and anti-interference ability of the detection and control circuit signals, thereby improving the reliability of the entire system.
Product Features
◆ Fully intelligent, digital, on-site programmable
Design of 16 bit high-precision acquisition chip
◆ Input fault status indication
12.7mm ultra-thin thickness, convenient for dense installation
◆ Standard DIN35mm rail installation
Technical Specifications
Transmission accuracy: ± 0.2% F · S (25 ℃± 2 ℃)
◆ Temperature drift: ≤ 50ppm/℃ (-20~+60 ℃)
Input impedance: current ≤ 60 Ω; Voltage ≥ 1M Ω
Load capacity: current ≤ 500 Ω; Voltage ≥ 1M Ω
Response time: ≤ 0.5 seconds
◆ Dielectric strength: ≥ 1500V AC (between input/output/power supply, leakage current 1mA, testing time 1min)
◆ Electromagnetic compatibility: meets the requirements of Class III industrial site anti electromagnetic interference in IEC61000-4-4:1995
Power supply: 20-30V DC
Power consumption: 0.65W (24V power supply, 1 full load output);
Working temperature: -20 to+60 ℃

Model Selection Spectrum

wiring method