Ultrasonic snow detection sensor

Ultrasonic snow detection sensorNon contact measurement avoids the compaction effect of traditional contact sensors (such as measuring scales and probes) on the snow surface, eliminates human reading errors, and ensures data objectivity. Real time monitoring of micro snow depth changes, supporting continuous measurement mode (interval can be set from 1 minute to 24 hours). Protection level IP68 protection standard, anti salt spray, anti UV coating, suitable for coastal or high-altitude environments. Establish a snow depth density model based on historical data and adjust the measured values. Data preprocessing and alarm support threshold setting, automatically issuing warning information when snow depth exceeds the preset value.

1、 Product Introduction

XL2Ultrasonic snow detection sensorIt is a sensor that uses ultrasonic technology to detect the distance of snow surfaces. The sensor adopts an integrated capacitive electrostatic transducer probe design, which has high sensitivity, strong anti-interference ability, and high accuracy.

2、 Technical indicators

Power supply: DC12V

Working environment: -40-60 ℃, humidity ≤ 100%, no condensation

Communication interface: RS485

Working current: 18mA DC12V

Shortest data interval: 0.2S

Shell material: Aluminum alloy material

Range: 0-2000mm

Measurement resolution: 1mm

Accuracy: 1mm ± 0.2% F.S

3、 Product dimension diagram

4、 Product usage

The installation location of the equipment should be chosen in an open area

The installation of the cross arm of the equipment should ensure a minimum of 1M

There should be no obstructions above the equipment

The distance from the equipment to the ground level should be within 20cm to 200cm. To ensure measurement accuracy, a recommended distance of 100cm is recommended

The equipment installation bracket should be kept level, and the reflective ground of the sensor should be treated horizontally. The reflection point should be within a radius of 1 meter to avoid interference from weeds