VS-2 VS-2X Vibration Speed Sensor

VS-2 VS-2X Vibration Speed SensorWith its characteristics of no external power supply, strong anti-interference ability, and adaptability to harsh environments, it is widely used in industrial and transportation fields that require high reliability and environmental adaptability. The following are its core application scenarios and typical cases:

1、 Automotive industry

Engine speed measurement

Application objects: Rotating components such as crankshafts, camshafts, flywheels, etc.

Function: Real time monitoring of engine speed, providing data for ignition control, fuel injection control, knock detection, etc.

Advantage: High temperature resistance（>150℃), oil resistant, and adaptable to harsh environments in the engine compartment.

Transmission and Transmission System

Application object: Transmission input/Output shaft, transmission gear.

Function: Monitor the speed difference, achieve shift logic control and clutch protection.

ABS/ESPsystem

Application object: Wheel speed sensor (some models use magneto electric type).

Function: To detect wheel speed, prevent slipping or locking, and improve driving safety.

VS-2 VS-2X Vibration Speed SensorIt is a vibration transmitter that integrates vibration sensors and signal conditioning circuits into one,Can directly convert the vibration signals collected on site into4～20mACurrent signal output. The output signal can be directly transmitted to the programmable controller（PLC）,Distributed Control System（DCS）Monitor, collector, recorder, or other monitoring devices.

This product uses high-end electronic components and is suitable for various applications*The SMT process has made the product structure compact, greatly reducing weight and volume, and lowering power consumption. At the same time, due to the integration of sensors and processing circuits, long-distance signal transmission is avoided, thereby improving anti-interference ability.

VS-2 Vibration Speed SensorIt can be widely used for bearing vibration measurement and real-time monitoring of rotating machinery such as fans, steam turbine units, coal mills, oxygen concentrators, generators, centrifuges, compressors, water pumps, motors, etc.

Technical Specifications:

Supply voltage:18Vdc～36Vdc(Two wire loop power supply, directly connected to the signal input port of the control equipment)

quantity Cheng:0～100mm/s(Speed value)/Vibration intensity or0～1000um(Displacement value)/Vibration amplitude

lose Output: Two wire system output4～20mA(Maximum load)500Ω）

Frequency response: Unidirectional (vertical, horizontal)10～1OOOHz（3db）

Any direction (universal)10～1OOOHz（3db）

essence Degree:<±2%
divide distinguish Rate:0.2%
Wen Float:0.1%/℃

Measurement direction: Any direction

Wiring method: two-wire system

Operating temperature:-20℃～80℃

Overall dimensions:φ30×70mm

Installation thread:M10×1.5×8mm(Optional)

Weight: Approximately350g
Shell material: stainless steel material, double-layer isolation,IP67Grade (please specify when purchasing)

Installation instructions:

First, tighten the double headed screws at the bottom of the transmitterM10×1.5×8Fix the screw at the measured point, and then tighten the transmitter on top.