Vibration Transmitter

HZD-B-9Vibration Transmitter

review HZD-B-9Vibration TransmitterWhen used in conjunction with vibration sensors, it can be widely used in the measurement and protection control of shaft vibration (rotor relative to bearing cover vibration) of large rotating machinery in industries such as power, metallurgy, petrochemicals, steel, and paper. Machine condition, damage, and developing damage can be identified in the form of fault symptoms during machine operation. Use vibration sensors or piezoelectric sensors to measure in the horizontal and vertical directions of the casing. This transmitter comes with a display4～20mAOutput and two relay outputs, and parameters such as range and alarm value can be set on site. The transmitter is installed using guide rails or screws, making on-site installation convenient.

1Technical specifications

• Power supply: +24VDC±10%

  input vibration sensor

  Measuring range: 0-50mm/sor0-800umInternally adjustable

  Record output: 4~20mA(Load ≤500(h)

  precision 1%

  Alarm relay output 2Group normally open relay (alarm, stop)

  Contact capacity 250VAC/3Aor30VDC/3A

• working environment

  Operating Temperature -20 ~70℃

  Storage temperature -30 ~ 85℃

  relative humidity 20 ~95%No condensation

• power waste: 10W

• Weight: ＜1Kg

• Instrument dimensions: high*long*deep =120mm *90mm*75mm

  (Minimum depth after adding wiring terminals)132mm）

•