Weight Loss Scale (Type I)

Model: RSL *****/V**

Belt width: B500~B1000

Storage bin size: 0.5-5m ³

Feeding capacity: 0.1~50t/h

Feeding accuracy: ± 0.5%

Weighing detection: three sensors, four sensors

Adjustment range: 1:5

Free fall, belt feeding, spiral feeding

Discharge method: Continuous weight loss method

Transmission form: high-efficiency shaft mounted reducer

The continuous weight loss feeder consists of a rack material bin, a feeding belt conveyor, and a feeding mechanism. The feeding belt conveyor is installed below the rack material bin. The system adjusts the speed of the frequency converter based on the control quantity of the continuous weight loss calculation cycle to achieve precise control of the ingredient quantity.

For materials with good fluidity, the replenishment method adopts free fall, and the feeding is controlled by the flap arc door control mechanism; For materials with poor fluidity, the feeding system adopts a belt pre feeder or a combination of a forced feeder for feeding. When the weight of the material in the silo reaches the minimum limit, the system automatically starts the replenishment mode and switches to the volumetric batching mode. When the replenishment process is completed, the system automatically resumes the continuous weight loss batching mode. To ensure control accuracy, it is necessary to reasonably select the size of the silo volume and high-resolution instruments, and minimize the number of replenishment times as much as possible.