Wire and cable heating deformation testing machine

Product Name: Wire and Cable Heating Deformation Testing Machine Product Model: ZY6016 Product Purpose: Used to test the degree of thermal deformation of materials such as plastics and wire rubber. Manufacturer prices: Non standard customization prices vary, welcome to choose and quote!

1、 Scope of application:

The wire and cable heating deformation testing machine is used to test the degree of thermal deformation of materials such as plastics and wire rubber.

At a specific temperature, place the specimen freely in the testing machine for 30 minutes, then clamp it between parallel plates of the machine, apply the specified load, and place it at the same temperature for another 30 minutes. Measure the thickness difference before and after heating with a gauge, and divide the thickness difference by the thickness before heating to obtain the deformation rate.

2、 Compliant with standards:

The wire and cable heating deformation testing machine complies with the UL2556-2015 "Wire and Cable Test Methods" section 7.8 and Figure 13 testing standards.

2. Complies with the requirements of Section 6.4 of GB/T8815-2014 "Flexible Polyvinyl Chloride Plastics for Wires and Cables".

3、 Performance parameters:

1. Experimental setup: 3 sets.

2. Temperature: Room temperature+10 ° C to 200 ° C.

3. Heating rate: (3-5) ° C/min.

4. Timer: Display 0-999 (H, M, S units can be switched), with an accuracy of 1s/h.

5. Equipped with an observation window.

6. Blower: It is a dual wing heat supply method.

7. Temperature controller: controls internal temperature and set temperature, microcomputer automatic calculation control, 4-digit LED display, AUTOTURNINGPID control, selectable input force, ALARM can be used for alarm or TIMER function selection.

8. Temperature control method: PID+SSR output.

9. Temperature measuring body: K-type thermocouple.

10. Material: SUS # stainless steel for the inner box, anti-static powder coated paint for the cold plate of the outer box, honeycomb stainless steel heater.

11. Insulation material: 100Kg/m3 diamond high-density glass rock wool, compression: high temperature resistant silicone strip.

12. Protection devices: overtemperature protector, motor overload protector, buzzer, fuse.

13. Heating tube power: 4.5kw.

14. Voltage: single-phase 220V 50Hz, total power 5.5KW. 25A.

15. Load weights: three each of 50, 100, 200, 500, and 1000g.

16. Measurement scale: 0.001/10mm, digital display.

17. Volume:

17.1 Inner box dimensions: length 600mm * depth 400mm * height 360mm.

17.2 Outer box dimensions: length 1200mm * width 650mm * height 1850mm.

18. Weight: 113kg.