Wireless data receiver temperature sensor

JC-CWS/1-02 Wireless Data Receiver

● Function Introduction

The JC-CWS/1-02 wireless data receiver consists of a CPU main control unit, a wireless transceiver module, a communication unit, an alarm output unit, a level conversion unit, and a display unit. The wireless transceiver module receives wireless signals and converts them into electrical signals through the level conversion unit. The CPU main control unit reads the temperature data of each monitoring point, centrally organizes, analyzes, and judges it, and displays the temperature data of each monitoring point through LCD. When there is alarm data, an alarm signal is output. The centrally organized data can be uploaded to the backend management system in real time through RS485.

Wireless data receiver temperature sensor

Wireless data receiver temperature sensor

characteristic
Receiving multiple wireless signals, one receiving multiple devices, can reduce the number of devices, lower costs, and save space;
Receive and display mixed signals from pressure transmitters, temperature transmitters, and other wireless signal modules simultaneously.
Various parameters can be set through the RS232 interface; The RS232 channel protocol is MODBUS protocol
You can set parameters and switch positions.
Clear display with high cost-effectiveness

● Technical indicators

☆ Frequency range: 240-930MHz can be set (factory setting is exempt from applying for 433MHz)

☆ Transmission distance: 100-1000m can be set

☆ Power supply: 220V ± 10% 50Hz (DC can be customized)

☆ 485 communication baud rate: 9600bps (other can be customized)

☆ LCD display: Each can have 1 to 30 temperature points, and can be customized if exceeded

Wireless data receiver temperature sensor