Wireless intelligent solenoid valve control device

Wireless intelligent solenoid valve control deviceBased on the actual application situation of the power plant, the specifications, models, configurations, installation interfaces, etc. of the supplied equipment will be implemented one by one, and modification suggestions will be proposed for inappropriate areas according to the specific situation. If any non-compliance is found during on-site installation and commissioning, our company will cooperate to make modifications and exchange equipment. ***Ultimately ensuring the safe, reliable, and stable operation of the equipment. In addition, our company provides corresponding instrument installation accessories and tools.

Basic principle:

Used for continuous control of 12 output circuits in uninterrupted cyclic operation. All 12 loads are solenoid valves, and only one solenoid valve is energized during each time period. The others cannot be energized, and the energized solenoid valve is kept working for a certain period of time before stopping. After a fixed interval, the next output runs, and the solenoid valve works for a certain length of time before stopping. An automatic loop repeats itself. And it has manual operation function, automatically switches to manual mode, and runs with single point motion. Electromagnetic valve model: LPDA25B-AC220V/SMC-VXF2160 orifice27mm, 6 pieces per box. Medium: Compressed air: 0.03~1.0MPa.

Simultaneously possessing the following advantages:
1. Easy installation, users can program on site;
2. No electric shock control, reliable performance;
3. Scalable, chained, and remotely controlled.

Specific requirements:

1. Power supply: 220VAC, with an air switch installed on the power inlet.
2. Output mode: 220VAC/5A relay output (normally open) with a total of 12 channels.
3. Interval time: The output time interval between each channel is adjustable from 5S-60S.
4. Conduction time: The duration of each conduction, adjustable from 0.1S to 1S.
5. Working environment: temperature -25~65 ℃; Humidity: ≤ 85%.
6. Operation mode: It operates in a cyclic conduction mode, with 1-12 channels automatically cycling one by one and switching between manual and automatic modes.

Manual: Connect one path each time you click.

Automatic: Conduct one circuit at each interval.

Wireless intelligent solenoid valve control deviceSystem Requirements

1. The output load is an electromagnetic valve, and each output is equipped with a 0.5A instant fuse, a mounting seat, and a fuse alarm indicator.

2. Omron or Schneider brand shall be selected for relays, and Yokogawa or Siemens brand shall be selected for instruments. ABB Schneider products are selected for electrical products such as switches, and * is required for other electrical components.

3. All external wiring must be equipped with terminal blocks, which should be selected from the Phoenix brand and reserved at 20%.

4. Internal wiring must be strictly wired according to specifications, and cable trays must be set up.