Wood compactor

Market demand for straw coal

Straw coal "is a new type of biomass renewable energy, which is clean and environmentally friendly. It is much cheaper than raw coal and has a wide range of applications. The use of coal-fired boilers in urban heating, heating, hotels, restaurants, bathing and other industries does not meet environmental requirements and can only use oil fired boilers. The cost of fuel is three times higher than that of" straw coal ", causing heavy operational pressure on the industry.
In recent years, the country has vigorously advocated and supported the development and utilization of biomass energy, and has invested in the construction of more than 110 biomass power plants across the country. However, the production of "straw coal" is far from meeting the market demand, with market sales prices ranging from 450 yuan/ton to 550 yuan/ton, forming a situation of supply shortage.
According to the International Renewable Energy Organization's forecast, the underground reserves of oil, natural gas, and coal are only sufficient for about 60 years of use at current extraction and utilization rates. Therefore, straw based biomass energy is an important development direction for future renewable energy. With the global energy scarcity, the market demand and profit margin for biomass renewable energy will be immeasurable.
The company has always been committed to the research and promotion of new energy-saving and environmentally friendly technologies and products. We have successfully developed and manufactured the leading national research brand series of straw compactors, which have solved various operational problems in the current production and processing of straw fuel compactors, especially in the uniform pressing of rice hulls, and filled many technical gaps.
Production and processing program: Cut materials exceeding 60mm with a grass cutter or crush them with a grinder, ensuring that the particle length and moisture content of the materials are within the specified range; The material is evenly fed into the feeding port above the forming machine by a feeding machine (belt conveyor) or manually, and then pressed and formed into the finished product. The process from raw material source to fuel use is: material recycling → cutting → automatic metal removal during feeding → pressing → forming → output → cooling → transportation → biomass power plants or small boilers or civilian use.
The JBM series straw compactor adopts the principle of the interaction between the squeezing force between the flat block and the pressing wheel and the friction force of the mold hole to form the material. The material does not require the addition of any additives or binders during the processing. Straw and other materials contain a certain amount of cellulose and lignin, and lignin is a structural monomer in the material, which is a high molecular weight compound of phenylpropane type. Has the ability to enhance cell walls and bond cellulose. Lignin is amorphous and mainly insoluble in any solvent at room temperature. It has no melting point but has a softening point. When the temperature reaches a certain value, the softening and bonding force of lignin increases, and under certain pressure, its cellulose molecular clusters are displaced, deformed, and stretched. The adjacent biomass particles inside are interlocked and recombined to form a compressed shape.
The development prospects of biomass fuels: In terms of the total amount of straw resources, various types of straw are produced in large quantities and have a wide range in rural areas and towns. Approximately 700 billion tons per year. Biomass solid fuel is the fourth largest energy source after coal, oil, and natural gas. It is a renewable resource that can replace mineral energy and is a key development direction in the future.
Policy support for purchasing and using straw fuel molding equipment. Straw fuel is an inexhaustible and renewable energy source, and its straw fuel molding equipment belongs to agricultural machinery. After purchase and use, agricultural machinery subsidies can be applied for locally, and assistance can also be submitted to the agricultural environmental protection department.
The straw fuel molding machine produced and sold by our company implements three guarantees; Due to non-human quality issues, we offer a six-month return and replacement policy; Free maintenance within one year. The after-sales service is in place, within three days within the province and five days outside the province.