XSM series speed measurement and control instrument (can be used to measure instantaneous flow of pulse input)

■ Can be equipped with various photoelectric switches, proximity switches, magneto electric sensors, and rotary encoders.

■ Based on measuring the frequency of the input signal, combined with adjustable parameters of the instrument, it is used for measuring speed, line speed, frequency, etc.

■ Measurement frequency range0.3Hz～25kHz. Less than0.3HzPress and hold0handle.

■ Basic error of frequency measurement

0.300～45.000HzWhen the range is less than0.01Hz

45.00～450.00HzWhen the range is less than0.02Hz

450.0～4500.0HzWhen the range is less than0.2Hz

4500～25000HzWhen the range is less than2Hz

■ Measurement control cycle:0.5Second (signal frequency)>3HzWhen).

■ Display range:-19999～45000The decimal point position can be set.

■ Optional1-4Point alarm output. It includes five basic alarm modes: upper limit of measurement value, lower limit of measurement value, upper limit of deviation, lower limit of deviation, and absolute value of deviation, as well as five standby alarm modes corresponding to the five basic alarm modes.

(Standby alarm mode: Refers to the situation where the instrument does not alarm even when it is in the alarm zone when powered on. When the measured value enters the non alarm zone, a standby condition is established and normal alarm is triggered thereafter.).

■ 2Optional external power supply.

■ Optional communication, transmission, and printing functions.