Xilin Injection Bottle Micro Leakage Sealing Tester

NegotiableUpdate on 12/24

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The Xilin injection bottle micro leakage sealing tester is specialized in non-destructive positive and negative pressure micro leakage testing of various empty/pre filled syringes, water and powder injection bottles (glass/plastic), filling and capping bottles, milk powder cans, other hard packaging containers, electrical components and other samples. This sealing instrument adopts advanced design and rigorous, scientific calculation methods to ensure its rapid testing, high accuracy, and high stability. It can also meet users' non-standard (software or testing fixture) customization needs.

Product Details

西林瓶注射剂瓶微泄露密封测试仪

Product Introduction:

Xilin Injection Bottle Micro Leakage Sealing TesterProfessional application for non-destructive positive and negative pressure micro leak testing of various empty/pre filled syringes, water and powder injection bottles (glass/plastic), filling and capping bottles, milk powder cans, other hard packaging containers, electrical components and other samples. This sealing instrument adopts advanced design and rigorous, scientific calculation methods to ensure its rapid testing, high accuracy, and high stability. It can also meet users' non-standard (software or testing fixture) customization needs.

Comparison of Leakage Test Methods
Compare projects	Water bath test	Micro leak detection
The minimum detectable aperture	10~20μm	<1 μ m detectable
Test time	＞30s	About 10 seconds
Quantitative indication management	Sensory testing, difficult to quantify	Leakage volume, leakage aperture
reproducibility	Poor repeatability	Can perform numerical reproduction
Destructive/Non destructive	Destructive test	Non destructive testing
test medium	Water (requires maintenance)	air
human error	Small leaks are difficult to detect	Numerical management, no need for manual labor
Leakage point confirmation	Can locate the leakage point	Cannot confirm the leakage point

Execution standard:

ASTM F2338-13 Standard Test Method for Packaging Leakage - Vacuum Attenuation Method USP1207 United States Pharmacopeia Standard

Drug GMP Guidelines - Sterile Drugs 11.1 Sealing Integrity Testing

Microbial examination method for Part Four of the 2020 edition of the Chinese Pharmacopoeia

Technical Guidelines for Sealing Research of Chemical Drug Injection Packaging Systems (Trial)

YYT 0681.18-2020 Test Methods for Aseptic Medical Device Packaging Part 18: Non destructive Testing of Packaging Leakage by Vacuum Attenuation Method

Chinese Pharmacopoeia 2025 Edition

GB/T 15171-2025 Test Method for Sealing Performance of Packaging Components

Technical advantages:

★ Optional built-in 10 inch touchscreen computer and external computer;

★ It can accurately display the leakage aperture (≥ 1 μ m) and leakage amount;

The test chamber and the host are arranged separately, and one set of test chambers is suitable for more than 5 specifications of samples;

★ The testing chamber is made of aluminum alloy or stainless steel, with pneumatic clamping;

★ Built in flow meter, one click completion of flow calibration;

★ Equipped with three calibration methods: zero point, leak hole, and flow rate;

The test results have three judgment modes: pressure attenuation, leakage aperture, and leakage flow rate

The test result shows that the flow error is less than or equal to 0.1 sccm

★ Vacuum resolution ≤ 1pa/0.01mbar/0.0001psi

★ Capable of converting testing units such as kpa/mbar/pa/psi

★ Can detect positive and negative pressure attenuation tests for various soft and hard samples such as penicillin bottles, infusion bags, contact lenses, milk powder cans, electronic accessories, etc;

Xilin Injection Bottle Micro Leakage Sealing Tester

Main parameters:

Parameter Name/Equipment Model	MLT -v100	MLT-V100(T)	MLT-V100(P)
test method	Vacuum attenuation method	Vacuum attenuation method/pressure attenuation method
measurement and control technology	Microcomputer, dual sensor testing technology
Vacuum method	vacuum pump
Positive pressure method	none	External gas source
testing unit	kPa/mbar/psi/Pa
resolution	1Pa	0.1Pa
test scope	-99~0kPa	-99~400kPa
measurement range	≥0.01ccm (约1μm )
test accuracy	±0.2μm (≥3μm )
test accuracy	±0.3μm (＜3μm )
Master control chip	STM microcomputer chip
sampling frequency	50~200Hz
control method	7 "LCD touch screen	10.1 "LCD touch screen	computer software
control system	Microcontroller system	Microcontroller system
audit trail	audit trail
data storage	600 sets	no upper limit
data transmission	USB/RS232/485
keyboard and mouse	not supported	support
reporting method	mini printer	Micro printer/A4 report	A4 Report
power supply	220V 50Hz
air supply pressure	none	≥0.5MPa
air source interface	6mm polyurethane pipe
Appearance material	Engineering plastics/stainless steel
Overall dimensions	320(L)×480(W)×320(H)	340(L)×480(W)×320(H)	340(L)×470(W)×320(H)
Equipment weight	About 20kg
Fixture configuration	Manual/automatic fixture