Xizheng brand intelligent steam thermal gas mass flowmeter

NegotiableUpdate on 12/25

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Xizheng brand intelligent steam thermal gas mass flowmeter $r $n structure description: $r $nA) integrated plug-in type should be inserted into the axis of the measured pipeline, so the length of the measuring rod depends on the size of the measuring pipe diameter. Please specify when placing an order. If it cannot be inserted into the axis of the pipeline, the manufacturer will provide calibration coefficients to complete accurate measurements. The $r $nB) integrated full tube type can be connected with flanges, threads, and clamps.

Product Details

Xizheng brand intelligent steam thermal gas mass flowmeter

Technical Specifications

Has the following technical advantages:

Ø A true quality flowmeter does not require temperature and pressure compensation for gas flow measurement, making the measurement convenient and accurate. The mass flow rate or standard volume flow rate of the gas can be obtained.

Ø Wide range ratio, capable of measuring flow rates up to120Nm/sGases as low as 0.1Nm/s can be used for gas leak detection.

Ø Good seismic performance and long service life. The sensor has no moving parts or pressure sensing components, and is not affected by vibration on measurement accuracy.

Ø Easy installation and maintenance. If on-site conditions permit, non-stop installation and maintenance can be achieved.(Special customization required)

Ø Digital design. The overall digital circuit measurement is accurate and easy to maintain.

Ø adoptRS-485Communication can achieve factory automation and integration.

Ø Measurement of oxygen, nitrogen, hydrogen, chlorine, and multi-component gases.

Ø Measurement of blast furnace gas and coke oven gas.

Ø Measurement of gas flow rates for natural gas, liquefied gas, flare gas, and other gases.

Ø Measurement of primary and secondary air flow in power plant blast furnaces.

Ø Measurement of flow rate in underground ventilation or exhaust systems.

Ø Measurement of flue gas.

Ø Compressed air measurement.

performance	Technical Specifications
structural form	plug-in	pipeline-style
measuring medium	Common steady-state gases (unstable media such as acetylene and boron trichloride cannot be measured)
Pipe diameter range	DN50～4000mm	DN6～2000mm
flow rate range	0.1～120Nm/s
accuracy	±1～2.5%
Operating Temperature	Sensor:-40～+450℃ converter:-20～+45℃
work pressure	Medium pressure ≤2.5MPa	Medium pressure ≤1.6MPa
power supply	(DC 24V orAC 220V)≤18W
response speed	1s
output signal	4-20mA (photoelectric isolation, maximum load)500Europe)RS-485(Optoelectronic isolation needs to be customized separately)
call the police	1-2 normally open contacts24V/0.5A
Supply type	integrated structure
Pipe material	Carbon steel, stainless steel, plastic, etc
On site display	Four lines Chinese character LCD display
Display content	Mass flow rate, standard volumetric flow rate, cumulative flow rate, standard flow rate, etc
Protection level	IP65
Sensor material	stainless steel	Stainless steel, carbon steel

Gas mass flowmeter

Xizheng brand intelligent steam thermal gas mass flowmeter