YD60 magneto electric speed sensor

NegotiableUpdate on 02/13

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The YD60 magneto electric speed sensor is a traditional structure that uses the principle of cutting magnetic field lines, and its simple and durable characteristics have been widely used in various industries in the market It converts angular displacement into electrical signals for counting by a counter, and can measure the rotational speed and linear velocity of various magnetic materials such as gears, impellers, and disks with holes (or slots, screws) without contact. Sensors have the advantages of small size, sturdy and reliable, long lifespan, high temperature resistance, and do not require power or lubricating oil Can be used with general secondary instruments.

Product Details

YD60Magnetic electric speed sensors can convert angular displacement into electrical signals for counters to count. As long as they are non-contact, they can measure the speed and linear velocity of various magnetic materials such as gears, impellers, and disks with holes (or grooves, screws).

Sensors have the advantages of small size, sturdy and reliable, long service life, and no need for power or lubricating oil, and can be used with general secondary instruments.

● Output waveform: approximate sine wave (≥)50r/min）

● Output signal amplitude:50r/minTime ≥300MvSignal amplitude size;

The gap between the sensor core and the measured gear tooth tip:δ＝0.5～1.5mm ;Tested gear modulem = 2 ;gearZ = 60;material:electrical steel;The amplitude of the signal is proportional to the rotational speed and inversely proportional to the gap between the iron core and the tooth tip

● Working temperature:-50～+120℃，-50～+200℃ (specially customized)

● Output format:X12K4PFour core plug or direct lead

● Frequency response:>30Hz

● Protection level:IP68

● Weight: Approximately120g(Excluding output wires)

● Usage time: Continuous use

● Vibration resistance performance: vibration（10Hz~2KHz）30g, impact100g

● Insulation strength:1000V 50Hz，1min(Channel and shell)

● Shell material: stainless steel304(Other materials can be used according to user requirements)

● dimension

尺寸图.jpg