YX-NOX101 Automotive Engine Exhaust Gas Detection Special Nitrogen Oxide Converter

NegotiableUpdate on 09/11

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

YX-NOX101 Automotive Engine Exhaust Gas Detection Special Nitrogen Oxide Converter YX-NOX101 Nitrogen Oxide Converter is used to measure NO2 or NOx using a NO analyzer. This product can convert NO2 in the exhaust of car engines into NO. It serves as a conversion device before measurement for NDIR infrared absorption nitrogen oxide analysis instruments and chemiluminescence nitrogen oxide analysis instruments. It converts NO2 in total nitrogen oxide NOx (NO+NO2) into NO for measurement, and measures the concentration of nitrogen dioxide NO2 or total nitrogen oxide NOx.

Product Details

Special nitrogen oxide converter for automobile engine exhaust detection

Nitrogen oxide converterProduct Background
In order to implement the Environmental Protection Law of the People's Republic of China and the Air Pollution Prevention and Control Law of the People's Republic of China, the "GB 18285-2018 Gasoline Vehicle Pollutant Emission Limits and Measurement Methods (Dual Idle Method and Simple Operating Condition Method)" issued on September 27, 2018 and implemented on May 1, 2019 requires the detection of pollutants such as carbon monoxide (CO), hydrocarbons (HC), and nitrogen oxides (NOx).
The YX-NOX101 nitrogen oxide converter is used to measure NO2 or NOx using a NO analyzer. This product can convert NO2 in the exhaust of car engines into NO. It serves as a conversion device before measurement for NDIR infrared absorption nitrogen oxide analysis instruments and chemiluminescence nitrogen oxide analysis instruments. It converts NO2 in total nitrogen oxide NOx (NO+NO2) into NO for measurement, and measures the concentration of nitrogen dioxide NO2 or total nitrogen oxide NOx.

Nitrogen oxide converterTechnical Features

The core catalytic conversion tube can be replaced (without the need for complete machine replacement)
Low temperature conversion technology (200 ℃~230 ℃)
High conversion efficiency (NO2 conversion efficiency greater than 90% at a concentration of 600ppm)
19 inch rack or wall mounted options available
Accurate temperature control, temperature can be freely adjusted
Temperature alarm output

Technical parameters of nitrogen oxide converter

model	YX-NOX101
Working temperature (factory preset)	220℃ (adjustable)
gas flow rate	1～5L/min
work pressure	Max. 2 bar abs.
warm-up time	≤30min
conversion efficiency	＞95%(Standard operating conditions)
service life	greater than3Months (depending on)NO2Actual concentration
Ambient Temperature	+10 °C～+50 °C
relative humidity	＜80%
Sample gas injection/outgoing interface	PVDF OD6mm
Installation method	19Rack mounted installation and wall mounted installation are optional
Overall dimensions	483(W)×132(H)×303(D)mm（19Rack mounted installation 362(W)×300(H)×123(D)mm(Wall mounted installation)
power supply	AC220V±10% 50Hz
power consumption	400W
Protection level	IP 20
weight	6Kg