ZNY-1 online viscometer

ZNY-1 online viscometer

Technical indicators:

Measurement range: 5-6 million MPa • s (customized according to user needs).

Speed: 1-800 RPM (continuously variable transmission) without gears.

Rotor: Customized according to requirements, with one standard configuration.

Measurement container: Depending on the on-site environment.

Measurement accuracy: ± 3% (full range).

Reproducibility: ± 1% (full scale).

Power supply: 110V/220V and 50Hz/60Hz.

Electromagnetic valve voltage: 220V AC.

Dimensions: 190xl15x26Omm.

Technical features:

Digital display, easy to install, operate, and clean

Signal output RS232, 485, 4-20mA, switch signal

The viscosity range can be adjusted according to user needs

Optional built-in control circuit to achieve automatic viscosity control

The control time of the switch signal can be adjusted as needed

Remote control

Structural principle:

The stepper motor rotates at a stable speed to drive the sensor piece, and then drives the rotor to rotate through the balance spring and shaft. If the rotor is subjected to liquid resistance, the balance spring sensor connecting piece and the stepper motor sensor connecting piece are in the same position. On the contrary, if the rotor is subjected to the viscous resistance of the liquid, the balance spring generates torque to counteract the viscous resistance, and finally reaches equilibrium. At this point, the liquid viscosity value is displayed through photoelectric sensors and processed by a 16 bit microcomputer processor. When the measured viscosity value is greater than the set viscosity value, the dilution solenoid valve can operate according to the program design requirements. Control the viscosity of the tested liquid around the set viscosity value. The program design can be determined based on the user's situation.