ZYC-300 series inspection microscope

1、 Instrument usage

The detection microscope can produce upright spatial images when observing objects. Strong stereoscopic effect, clear and wide imaging, and long working distance make it a widely applicable conventional microscope. It is easy to operate, intuitive, and has high calibration efficiency. It is suitable for the inspection of electronic industry production lines, printed circuit boards, welding defects (printing misalignment, edge collapse, etc.) in printed circuit components, single board PC calibration, vacuum fluorescent display VFD calibration, etc. It can not only enlarge the image of the physical object for real-time observation on the computer screen, but also edit, save, and print the image. Equipped with measurement software, various data can be measured.

2、 Technical specifications

You can directly observe physical images on the television or computer.

1. Magnification range of objective lens: 0.7~4.5X;

2. Magnification ratio: 6.5:1;
3. Mobile working distance: 200mm;
4. Table size: 390 × 160 (mm);
5. Total magnification: 7-450X (taking a 21 inch TV with a 2x large objective lens as an example).

3、 System Introduction

Computer based inspection microscope is an organic combination of traditional optical microscope and computer through photoelectric conversion. It can not only perform microscopic observation on the eyepiece, but also observe real-time dynamic images on the computer display screen, and edit, save and print the required images.

4、 System composition

Computer type inspection microscope (ZYC-300E): 1, straight tube microscope 2, adapter lens 3, digital color camera 4, data cable 5. Computer (optional)

5、 Reference magnification factor

Computer type (ZYC-300E): 7-320x (taking a 17 inch monitor and 2x large objective lens as an example)