tuning fork densitometer

NegotiableUpdate on 01/20

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The tuning fork densitometer is a direct insertion instrument for online measurement of density and concentration, providing an integrated "plug and play, maintenance free" density and concentration measurement. Mainly used for industrial process automation control, it can be widely applied to industrial sites such as pipelines, open or closed storage tanks, etc. It can be applied to density

Product Details

Working principle of tuning fork densitometer

The tuning fork series online density and concentration meter uses a sound frequency signal source to excite a metal tuning fork and make it vibrate freely at the center frequency, which is related to the density of the liquid in contact. Therefore, by analyzing the frequency, the density of the liquid can be measured, and then temperature compensation can be carried out to eliminate the system's temperature drift; The concentration value at a temperature of 20 ℃ can be calculated based on the relationship between the density and concentration of the corresponding liquid.

Application industry of tuning fork densitometer

Petrochemical industry: diesel, gasoline, ethylene, etc

Chemical industry: sulfuric acid, hydrochloric acid, nitric acid, ammonia water, methanol, ethanol, saline water, sodium hydroxide, frozen liquid, sodium carbonate, glycerol, hydrogen peroxide, etc

Pharmaceutical industry: pharmaceuticals, biological liquids, alcohol extraction, acetone, alcohol recovery, etc. Food and beverage industry: sugar water, fruit juice, brewing, cream, etc

Battery and electrolyte industry: sulfuric acid, lithium hydroxide, etc

Environmental protection industry: desulfurization (lime slurry, stone paste slurry), denitrification (ammonia water, urea), wastewater treatment (mvr acid, alkali, salt recovery), etc

Parameters of tuning fork densitometer

Density measurement range	0.5 – 2.5 g /cc (500 – 2500 kg/m3)
Calibration range	0.8 – 1.2 g /cc (800 – 1200 kg/m3)
measurement accuracy	± 0.001 g /cc (± 1 kg/m3)/± 0.002 g /cc (± 2 kg/m3)
repetitiveness	± 0.0002 g /cc (± 0.2 kg/m3)
Temperature output range	-20℃ ~ +150℃
work pressure	10MPa Special 20MPa
Fluid viscosity range	0 – 20000 cP
temperature coefficient	Less than 0.1 kg/m3/℃ (corrected)
Pressure impact	negligible
Built in temperature sensor	PT100
wetted material	316L stainless steel Hastelloy alloy
Fork body coating	Standard type, PTFE or electrolytic polishing
power supply	24VDC，≥500mA
Analog signal output	4 -20 mA，0-1000Hz，RS485 Modbus RTU
Output accuracy (20 ℃)	± 0.1% or ± 0.05% FS of the reading
Output repeatability (-40~+85 ℃)	± 0.05% FS
process connection	ANSI 150 ~ 1500 RF DIN 50 PN16 DIN 50 PN40 IDF and RJT sanitary type
Protection level	IP65
shell	aluminum alloy

Typical industry of tuning fork densitometer

Petroleum and petrochemical industry - Interface detection - Multi oil transportation pipelines

Chemical industry - Production of acid-base salts - Quality control

Brewing Industry - Quality Control - Continuous Online Testing

Organic and Inorganic Chemical Materials - Leak Detection - Underground Storage Tanks Using Saltwater

Pharmaceutical industry - Chinese medicine concentration, alcohol recovery

Battery industry - lithium hydroxide, electrolyte, sulfuric acid solution concentration